Page History
...
Log on to SBC BMC GUI using the IP address configured in one of the previous sections.
Info icon false title Note Use any one of the following methods to obtain the BMC IP address:
- Configuring SBC 5400 BMC IP Address Via Serial Console
Or
Code Block language none username: root password: superuser
The BMC Main Screen appears:Caption 0 Figure 1 BMC Main Screen Click Navigate to Configuration > Platform Management Network tab. The Platform Management Network Settings screen is displayed.
Info icon false title Note Refer to SBC 5400 Media Ports and Operational Modes to know more about these four media ports and their operational modes.
The SBC 5400 platform includes the following configurable media port configurations.
Caption 0 Figure 1 Platform Management Network Settings Info icon false title Note A message appears to enter the management IP addresses for the first time installation.
If the management interfaces have not yet been configured, a warning message appears. Click OK to proceed with the Management Port configuration.
Caption 0 Figure 1 Management Interfaces Not Configured Warning message - Configure the following network settings for all the four management interfaces as needed:
- IPv4 Address, Prefix and Default Gateway
- IPv6 Address, Prefix and Default Gateway
Info icon false title Note The IPv4 Address, Prefix and Default Gateway should be configured for Management Interface "0". For all other Management Interfaces, the settings are optional.
Caption 0 Figure 1 BMC Platform Management Network Settings Window Click Save.
Info icon false title Note Once you save the changes to the Management IP addresses, a warning message appears. Note that the changes to the Management IP addresses will only take effect when the SBC application is Installed (or re-Installed if already present). Refer to SBC 5400 - Installing Application for more information.
Caption 0 Figure 1 BMC Warning Message 
- Click OK to complete the process.
...
Overview
Content Tools