...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | SBC 5400 Platform CRUs |
|---|
|
Equipment Requirement | Description |
|---|
Fan Assembly | Three cooling fan assemblies located behind the front bezel. | Solid State Drive | Solid State Disk (SSD) storage accessible from rear of the chassis.
 | Air Filter | Located within the front bezel assembly for filtering the air drawn into the chassis by the cooling fans. | SFP/SFP+ | Single or Multi mode fiber transceivers and Copper (LC type connector) or copper SFP/SFP+ (which functions like a plug) used for Ethernet connections
to Media ports and HA ports. Connect to LC-connector on the SFP side and SX-module on the other end of the connection
to L3 switch.
| Power Supply | Up to two DC or AC power supplies accessible from rear of chassis. | Bezel | Secures replaceable air filter to front of chassis and identifies LED status indicators. | | DSP2x | DSP2x Signal Processing Cards (plug-in module with a high capacity DSP card). |
|
DSP2x Signal Processing Cards
...
for
This is the Signal Processing Server (SPS) for SBC 5400 for
and provides increased signal processing capabilities by incorporating the latest DSP technology.
It is an add-on module that can connect to SBS200 motherboard through a 150-pin connector.The DSP2x cards contain the actual DSP processing resources. SBC 5400
has four slots which provides maximum capacity. The cards are hot swappable and installable/replaceable in the field.
...