Versions Compared

Old Version 5

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 6

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...


Parameter


Description

Name

Specifies the name of the zone. Must be 1-23 characters. The value ranges up to 23 characters.

Note

Zone name is unique across all address contexts.

ID

Unique ID of this zone. The value ranges from 1 to 4096.

Note

Zone ID is unique across all address contexts.

Disable Zone Level Loop Detection

  • If disabled (default), Global Loop Detection flag takes precedence.

  • If enabled, Loop Detection is disabled, irrespective of Global Loop Detection flag.

DNS Group

The name of the DNS group. Select the DNS group from the drop-down list.

Remote Device Type

Specifies the type of device facing this Zone. The options are:

  • None (default)
     
  • accessDevice
  • appServer
  • Core
  • Nni
Domain NameSpecifies the name of the fully qualified domain name for this Zone. The value ranges up to 63 characters.
SIP Register Relay

Enable flag to relay REGISTER using the routes from PSX. Options are:

  • Disabled (default)
  • Enabled
Dialog Transparency

This parameter specifies if dialog transparency is enabled for SIP messages processed in that zone. If enabled, SBC sends "Call-ID", "From" tag, and "To" tag transparently in the outgoing message.

Note

The parameter Dialog Transparency must be enabled in both the ingress and egress zones.

Note

To enable Dialog Transparency for a zone, first disable all Sip Sig Port for that zone.

  • Disabled (default): SBC translates the dialog identifiers in the Target-Dialog header received in INVITE and REFER messages and sends the Target-Dialog header with translated dialog identifiers on the other leg.
  • Enabled: Target-Dialog header translation is not performed. However, the header is transparently passed if configured in transparency profile.
Note

The following features are not supported on SBC when Dialog Transparency is enabled:

  • Support of local handling of REFER (REFER relay is supported)
  • Late media support 
  • Dialog Transparency support in REGISTER
  • NICE recording call flows
  • GW-GW support
Info

For feature functionality and configuration guidance, see Downstream Forking Support and Configuring Downstream Forking with Dialog Transparency.


Flexible Policy Adapter Profile

Use this Zone/Trunk Group parameter to associate a Sip Adapter Profile configured for flexible policy (Profile Type=Flexible Policy) with a particular Zone/Trunk Group.

If Flexible Policy Adapter Profile is provisioned both at the trunk group and zone levels, the trunk group’s profile takes precedence. If Input Adapter Profile is configured, it is applied first to manipulate the PDU and then Flexible Policy Adapter Profile rules are applied on the manipulated PDU.

Include Page
ePSX_and_PSX only_Flexible_Policy
ePSX_and_PSX only_Flexible_Policy

...