Page History

...

1. Login to CLI and Enter configuration mode.
2. Define signaling/media IP interfaces.
   1. Set the IP Address and Network prefix.
   2. Associate it with the physical ethernet port or VLAN on that port.
3. Set up signaling/media IP routing
   1. Add Static IP Routes for peers on the trusted network.
   2. Add Static IP Routes for peers on the untrusted network.
4. Define the allowed media parameters.
1. Set the Codec type in the Packet Service Profile (PSP).
5. Create the core network zone.
   1. Create the Zone “default.core”.
   2. Assign the SIP signaling port address.
   3. Define SIP Trunk Groups for peers.
6. Create the untrusted network zone.
   1. Create the Zone “default.untrusted”.
   2. Assign the SIP signaling port address.
   3. Define SIP Trunk Groups for peers.
7. Create core network IP peers.
8. Create untrusted network IP peers (static, not registering, peers).
9. Create call routes to network IP peers.
1. Create routing label “to_core”.
2. Create Standard Route “599625” using routing label “to_core”.
10. Create call routes to outside IP peers.
    1. Create routing label “to_untrusted”.
    2. Create Standard Route “599626” using routing label “to_untrusted”.