Page History

...

Perform the following steps to save the existing 

1. Login Log on to the SBC CLI. Execute the following command to save the SBC configuration. 

   Code Block
   language none title Example:
   admin@SBC01a> request system admin SBC01 saveConfig This command will save the current configuration. Do you want to continue (yes/no) yes Proceeding result success reason Configuration Saved as /var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz

   Note
   This command saves the current configuration to a time-stamped zipped tar file located in /var/log/sonus/sbx/config directory of SBC active server.

2. Use SFTP (default login/password is sftpadmin/sftpadmin) to copy the configuration file from the active server to the remote server. Following is an example to transfer the saved configuration file to a remote linux server.

   Code Block
   language none title Example:
   # sftp -oPort=2024 sftpadmin@SBC01a:/var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz /home/bob/SBC01/config sftpadmin@SBC01a's password: <sftpadmin> Connected to SBC01a. Fetching /var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz to /home/bob/SBC01/config

   Note
   The backup file created by this procedure is used to restore the system configuration if re-installation of the software is needed for any reason. To reload the configuration, see Restoring the SBC Configuration for guidance.

...