This section provides the safety and regulatory information for
platforms.
For the purpose of regulatory compliance certifications and identification, the
are assigned the following model numbers:
- SBC 5200 and SBC 5100
- SBC 5210 and SBC 5110
- SBC 5400
The compliance model number is available on the product label along with the required approval markings and information. Refer to the model number while requesting for certification information for the product.
Warning |
---|
Read and observe all Notes, Cautions, and Warnings before beginning the SBC 5000 system hardware installation. |
Warning |
---|
|
1) Connect the chassis to protective earth ground before connecting the power to the unit. 2) Disconnect all the input power sources to disconnect power from the unit. |
Excerpt Include |
---|
| About SBC Documentation |
---|
| About SBC Documentation |
---|
nopanel | true |
---|
|
The following table lists the safety standards applicable to the
hardware platforms:
Caption |
---|
0 | Table |
---|
1 | SBC 5000 Series Safety Standards |
---|
3 | SBC Safety Standards |
---|
|
SBC Platform
| Safety Standards | EMC and Immunity Standards | Environmental Standards |
---|
5100/5200 | SBC 5100/5200 comply with the following standards, and are listed with TUV SUD America: - IEC/EN60950-1: 2005 2nd Ed + A1:2009
- EN 60950-1:2006/A11:2009/A1:2010
- UL 60950-1:2007, CAN CSA-22.2 No. 60950-1:2007
| SBC 5100/5200 comply with the following EMC and Immunity standards: - 47 CFR 15B Class A
- ICES-003 Class A
- EN55022 Class A
- VCCI Class A
- AS/NZ 3548 Class A
- EN 300-386
- EN55024
- IEC 61000-4-2
- IEC 61000-4-3
- IEC 61000-4-4
- IEC 61000-4-5
- IEC 61000-4-6
- IEC 61000-4-8
- IEC 61000-4-1
| EN 300-019 | 5110/5210/5400 | SBC 5110/5210/5400 comply with the following standards, and are listed with TUV SUD America: | SBC 5110/5210/5400 comply with the following EMC and Immunity standards: - EN55022:201 O/AC:2011 Class A
- EN 61 000-3-2
- EN 61000-3-3
- EN 55024:2010
- EN 61000-4-2
- EN 61 000-4-3
- EN 61000-4-4
- EN 61 000-4-5
- EN 61 000-4-6
- EN 61000-4-8
- EN 61000-4-11
- EN 300 386 v1 .6.1
| EN50581:2012 |
|
Note |
---|
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. |
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Warning |
---|
|
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. |
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
Image Modified
This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may occur, in which case, the user may be required to take corrective actions.
This is a Class A product based on the standard of the China Compulsory Certificate (CCC).
The SBC 5000 systems comply with Telcordia NEBS Level 3 requirements per SR-3580, including the appropriate sections of GR-63-CORE (Network Equipment-Building System Requirements: Physical Protection) and GR-1089- CORE (Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment).