Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

 

Launch the remote console JViewer application by using a supported web browser on your PC to remotely connect to the

Spacevars
0product
 host console. Remote Console is mainly used to re-install the ConnexIP Operating System or remote access of the host server.

Info
The default network ports used by BMC system controller are listed on the page SBC 5000 and 7000 Series Core Network Listener Ports. These ports are not configurable and are fixed for use by the BMC. Depending on your network these ports may need to be configured as part of your router or firewall configuration.

...

Note

By default, the JViewer remote console is disabled from the BMC GUI. Navigate to Configuration > BMC Network and you can see the JViewer disable status in the Security section.

...


Due to this, when you launch the JViewer Console from Remote Console > Console Redirection screen, the message "Java Console is disabled, please enable in Configuration > BMC Network" appears on the screen.

Caption
0Figure
1Disabling Java Console Screen

...

  1. Login to the SBC BMC using the credentials:
    Username: root
    Password: superuser

    The BMC Main Screen is displayed.

    Caption
    0Figure
    1BMC Main Screen

    Image Modified


  2. Click Configuration > BMC Network. The BMC Network Settings screen is displayed.

    Caption
    0Figure
    1Default Security Settings

  3. Select Enable JViewer and click Save.

    Caption
    0Figure
    1Enabling JViewer

    Image Modified

  4. A successful message appears on the screen. Click OK to continue.

    Caption
    0Figure
    1Successfully setting Parameter

    Image Modified

  5. Select the Remote Control > Console Redirection tab on the BMC main screen. The Remote Control console redirection screen is displayed.

    Caption
    0Figure
    1Remote Control Screen

    Image Removed

    Click Console Redirection from the Options menu. The console redirection screen displays.

    Caption
    0Figure
    1Console Redirection Screen

  6. Click Java Console in the Console Redirection screen to launch the remote console (JViewer).

    Note

    To enhance SBC Platform security, log on to JViewer Console using the 'linuxadmin' credentials. The direct 'root' access is no longer supported.

  7. Log on to SBC through Remote Console using the following credentials:
    Username: linuxadmin
    Password: sonus
     

    Caption
    0Figure
    1Remote Console (JViewer)


  8. At the prompt, switch user to 'root' using the following command:

    Code Block
    languagenone
    su - 

     

    Caption
    0Figure
    1JViewer - root access

    Image Removed


  9. Enter the 'root' password as sonus1. 

  10. Click <Enter>. You are now in "root" access.

    Caption
    0Figure
    1JViewer - root useraccess
    Image Removed

    Image Added


     Once you are in 'root' access, proceed with you actions. 

...