Add_workflow_for_techpubs
The
Spacevars | ||
---|---|---|
|
Caption | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||
|
Caption | ||||||
---|---|---|---|---|---|---|
| ||||||
|
Info | ||
---|---|---|
| ||
|
Info | ||
---|---|---|
| ||
|
Media port speed is user-configurable. The following licenses support the media port configurations:
Info | ||||
---|---|---|---|---|
| ||||
Refer to SBC 5400 Hardware Platform Specifications and Connecting SBC 5400 Ethernet and Data Cables for additional hardware details. Refer to SBC Node-Locked Licenses for HW and SWe SBCs for licensing details. |
Customers may upgrade or change the licensed network interfaces on their
Spacevars | ||
---|---|---|
|
Caption | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
|
Info | ||||
---|---|---|---|---|
| ||||
A media port operating in 10 GbE mode supports 10 Gb/s speed, full-duplex only and auto-negotiations is unsupported in this mode. Media ports operating in 1 GbE mode supports operation at 1 Gb/s speed, full duplex mode only with auto-negotiation enabled. |
10 GbE Mode
Code Block |
---|
[root@CHIVAS linuxadmin]# ethtool pkt0 Settings for pkt0: Supported ports: [ FIBRE ] Supported link modes: Not reported Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: internal Auto-negotiation: off Link detected: yes |
Code Block |
---|
[root@CHIVAS linuxadmin]# ethtool pkt1 Settings for pkt1: Supported ports: [ FIBRE ] Supported link modes: Not reported Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: internal Auto-negotiation: off Link detected: yes |
1 GbE Mode
Code Block |
---|
[root@YF39 ~]# ethtool pkt0 Settings for pkt0: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: internal Auto-negotiation: on Link detected: yes [root@YF39 ~]# ethtool pkt1 Settings for pkt1: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: internal Auto-negotiation: on Link detected: yes [root@YF39 ~]# ethtool pkt2 Settings for pkt2: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: internal Auto-negotiation: on Link detected: yes [root@YF39 ~]# ethtool pkt3 Settings for pkt3: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: internal Auto-negotiation: on Link detected: yes [root@YF39 ~]# |
Warning | ||
---|---|---|
| ||
Any changes to the media port speed, deletes the existing configuration. To use the option, |
Pagebreak |
---|