Page History

Add_workflow_for_techpubsAUTH1JIRAIDAUTHSBX-70023REV5REV6REV3REV1

Panel

In this section:

Table of Contents

maxLevel	4

SIP Active Group Registration Status

Active SIP group registration status for a list of SIP endpoints.

Command Syntax

Code Block

language	none

> show table addressContext <addressContext_name> sipActiveGroupRegStatus <id>
aorName | contactURI | creationTime | extExpirationTime | intExpirationTime | nextHopIpAddress | nextHopPortNum | regIdIsChild | registrarDomainName | registrarIpAddress | registrarPortNum | state

Multiexcerpt

MultiExcerptName	SIPActiveGroupRegistrationStatus

Command Parameters

Caption

0	Table
1	SIP Active Group Registration Status Parameters
3	SIP Active Group Registration Status Parameters

Parameter	Description
`aorName`	The E.164 number and host portion plus optional BGID representing the Address of Record of the registering endpoint.
`contactURI`	The SIP CONTACT URI header.
`creationTime`	Octet string that identifies the date and GMT time at which the SIP registration is initiated.
`extExpirationTime`	The external expiration timer value in seconds.
`intExpirationTime`	The internal expiration timer value in seconds.
`nextHopIpAddress`	Next hop TSAP IP address.
`nextHopPortNum`	Next hop TSAP UDP port number.
`regIdIsChild`	Flag to optionally display results where the specified next registration ID is a child.
`registrarDomainName`	SIP registrar's domain name.
`registrarIpAddress`	SIP registrar's IP address.
`registrarPortNum`	SIP registrar's UDP port number.
`regType`	This field indicates the type of registrations. The registration type can be `'normal'` or `'emergency'.`
`state`	The registration state of the endpoint: <challenged \| completed \| deleting \| expired \| initiating \| null \| refreshing \| terminated \| updating> See Registration State Descriptions table below.

SIP Active Group Registration Summary Status

The active SIP group registration summary for a list of SIP endpoints.

Command Syntax

Code Block

language	none

> show table addressContext <addressContext_name> sipActiveGroupRegSummaryStatus

Multiexcerpt

MultiExcerptName	SIPActiveGroupRegistrationSummaryStatus

Command Parameters

Caption

0	Table
1	SIP Active Group Registration Summary Status Parameters
3	SIP Active Group Registration Summary Status Parameters

Parameter	Description
`aorName`	The E.164 number and host portion plus optional BGID representing the Address of Record of the registering endpoint.
`nextRegId`	The next registration ID.
`nextRegIdIsChild`	Displays the next registration ID if it is a child.
`registrarIpAddress`	Registrar IP address.
`registrationType`	Registration type. The registration type can be `'normal'` or `'emergency'.`
`state`	The registration state of the endpoint: <challenged \| completed \| deleting \| expired \| initiating \| null \| refreshing \| terminated \| updating> See Registration State Descriptions table below.

SIP Active Register Name Status

The active SIP registration name status for a list of SIP endpoints.

Command Syntax

Code Block

language	none

> show table addressContext <addressContext_name> sipActiveRegisterNameStatus <name>

Multiexcerpt

MultiExcerptName	SIPActiveRegisterNameStatus

Command Parameters

Caption

0	Table
1	SIP Active Register Name Status Parameters
3	SIP Active Register Name Status Parameters

Parameter	Description
`name`	AoR name.
`contactURI`	SIP CONTACT URI header.
`creationTime`	Octet string identifying date and GMT time at which the SIP registration is initiated.
`e2aeMediaSecurity`	Media-security status of the UE in the registration record <sdes-srtp or none>. If set to `sdes-srtp`, UE has e2ae (end-to-access edge) capability.
`endPointBehindNapt`	If value is“1”, the registered endpoint is behind NAPT; otherwise, value is “0”.
`externalExpirationTime`	The time left, in seconds, before registration expires towards the end point.
`internalExpirationTime`	The time left, in seconds, before registration expires towards the AS.
`isRoaming`	A value of "1" indicates registered UE is roaming (not on home network). Otherwise, value is "0".
`mobileCountryCode`	Mobile Country Code of the UE's current location.
`mobileNetworkCode`	Mobile Network Code of the UE's current location.
`natPinholeLearningStatus`	NAT pinhole learning process status. <aborted-due-to-traffic \| completed \| completed-due-to-timeout \| disabled \| none \| progressing>
`nextHopIpAddress`	Next hop Transport Service Access Point (TSAP) IP address.
`nextHopPortNum`	Next hop TSAP UDP port number.
`registrarDomainName`	The SIP registrar's domain name.
`registrarIpAddress`	SIP Registrar's IP Address.
`registrarPortNum`	SIP Registrar's UDP port number.
`regType`	This field indicates the type of registrations. The registration type can be `'normal'` or `'emergency'.`
`securityMechanismType`	The security mechanism type used for this registration. <ipsec-3gpp \| none \| tls>
`state`	The registration state of the endpoint: <challenged \| completed \| deleting \| initiating \| null \| refreshing \| terminated \| updating> See Registration State Descriptions table below.
`transportProtocolToAS`	The transport protocol used on access toward AS.
`transportProtocolToEndpoint`	The transport protocol used on access towards the endpoint.
`ueRoamingType`	`0` – Home User `1` – Ravel Roaming User `2` – S8HR User Roaming in Visited Network `3` – S8HR User Roaming in Home Network
`viaHeaderAddress`	The IP address of the bottom-most Via header of a SIP Message populated by the very first originator of the REGISTER request.

Caption

0	Table
1	Registration State Descriptions
3	RegStateDesc

State	Description
challenged	401 received from Registrar and relayed to UAC.
completed	Successful response received from Registrar and relayed to UAC.
deleting	Unregister received from UAC.
initiating	Resister sent to Registrar and waiting for response.
null	Initial state, waiting for Route response.
refreshing	Register Refresh request sent to Registrar and waiting for response.
terminated	Failure other than 401 or no response from Registrar.
updating	Modify request sent to Registrar and waiting for response.

SIP Deleted Registration Status

The SIP registration status for a list of deleted SIP endpoints.

Command Syntax

Code Block

language	none

> show table addressContext <addressContext_name> sipDeletedRegStatus

Multiexcerpt

MultiExcerptName	SIPDeletedRegistrationStatus

Command Parameters

Caption

0	Table
1	SIP Deleted Registration Status Parameters
3	SIP Deleted Registration Status Parameters

Parameter	Description
`id`	SIP endpoint ID
`aorName`	The E.164 number and host portion plus optional BGID representing the address Of Record of the registering endpoint.
`contactURI`	The SIP CONTACT URI header.
`creationTime`	Octet string that identifies the date and GMT time at which the SIP registration is initiated.
`nextHopIpAddress`	Next hop Transport Service Access Point (TSAP) IP address.
`nextHopPortNum`	Next hop TSAP UDP port number.
`reasonCode`	Registration termination reason. <configProblem \| endpointInitiated \| internalError \| none \| regTimerExpired \| registrationMoved \| registrationRejected \| serviceUnavailable>
`registrarDomainName`	The SIP registrar's domain name.
`registrarIpAddress`	SIP registrar's IP address.
`registrarPortNum`	SIP registrar's UDP port number.
`terminationTime`	Date and GMT time at which the SIP registration is terminated.

SIP Deleted Register Name Status

The deleted SIP registered name for a list of SIP endpoints.

Command Syntax

Code Block

language	none

> show table addressContext <addressContext_name> sipDeletedRegisterNameStatus

Multiexcerpt

MultiExcerptName	SIPDeletedRegisterNameStatus

Command Parameters

Caption

0	Table
1	SIP Deleted Register Name Status Parameters
3	SIP Deleted Register Name Status Parameters

Parameter	Description
`aorName`	The E.164 number and host portion plus optional BGID representing the Address Of Record of the registered endpoint.
`id`	The registration ID created for the registration session.
`reasonCode`	The registration termination reason.
`contactURI`	The SIP CONTACT URI header.
`nextHopIpAddress`	Next hop IP address.
`nextHopPortNum`	Next hop TSAP UDP port number.
`registrarIpAddress`	Registrar's IP address.
`registrarPortNum`	SIP registrar's UDP port number.
`creationTime`	Octet string that identifies the date and GMT time at which the SIP registration is initiated.
`terminationTime`	Octet string that identifies the date and GMT time at which the SIP registration is terminated.
`registrarDomainName`	The SIP registrar's domain name.

SIP Registration Count Domain Statistics

Displays the SIP registration statistics on a per domain basis. An address context must be specified and specifying a domain is optional. If a specific domain is not specified the command returns per-domain statistics for up to 256 domains. The command returns no data if there are no domain names found.

Command Syntax

Code Block

language	none

> show table addressContext <AC_Name> sipRegCountDomainStats <DomainName>
    countAttempts
    countCumCompletions
    countPending
    countStable
    countTotal
    emergAcceptTotal
    emergActiveTotal

Multiexcerpt

MultiExcerptName	sipRegCountDomainStats

Command Parameters

Caption

0	Table
1	SIP Registration Count Domain Statistics Parameters
3	SIP Registration Count Domain Statistics Parameters

Parameter	Description
`countAttempts`	The number of SIP registration attempts.
`countCumCompletions`	The cumulative number of completed SIP registration attempts.
`countPending`	The current number of pending SIP registrations.
`countStable`	The current number of stable SIP registrations.
`countTotal`	The current total number of SIP registrations.
`emergAcceptTotal`	The total number of emergency SIP registrations accepted.
`emergActiveTotal`	The total number of emergency SIP registrations currently active.

SIP Registration Count Statistics

Displays the SIP registration count statistics for the SIP endpoints or node.

Command Syntax

Code Block

language	none

> show table addressContext <addressContext_name> sipRegCountStatistics
	sipRegCountAttempts
	sipRegCountCumCompletions
	sipRegCountPending
	sipRegCountStable
	sipRegCountTotal

Multiexcerpt

MultiExcerptName	SIPRegistrationCountStatistics

Command Parameters

Caption

0	Table
1	SIP Registration Count Statistics Parameters
3	SIP Registration Count Statistics Parameters

Parameter	Description
`subscription`	Name of the subscription.
`sipEmergencyRegAcceptTotal`	The total number of accepted emergency SIP registrations.
`sipEmergencyRegActiveTotal`	The total number of active emergency SIP registrations.
`sipRegCountAttempts`	Number of SIP registration attempts on SBC.
`sipRegCountCumCompletions`	Accumulative number of completed SIP registration attempts.
`sipRegCountPending`	Current number of pending SIP registrations.
`sipRegCountStable`	Current number of stable SIP registrations.
`sipRegCountTotal`	The total number of current SIP registrations.

Pagebreak

Space shortcuts

Page tree

Versions Compared

Old Version 6

New Version 7

Key

SIP Active Group Registration Status

Command Syntax

Command Parameters

SIP Active Group Registration Summary Status

Command Syntax

Command Parameters

SIP Active Register Name Status

Command Syntax

Command Parameters

SIP Deleted Registration Status

Command Syntax

Command Parameters

SIP Deleted Register Name Status

Command Syntax

Command Parameters

SIP Registration Count Domain Statistics

Command Syntax

Command Parameters

SIP Registration Count Statistics

Command Syntax

Command Parameters