Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1
JIRAIDAUTHSBX-75209
REV5
REV6
REV3
REV1

 

Panel

In this section:

Table of Contents

Overview

Upgrading from an SBC 3.1.x/4.x involves:

  1. Upgrading Firmware (not applicable to SBC SWe)

    Info
    iconfalse
    titleNote

    This step upgrades BMC for 5xx0 series, 5400 and 7000 series, and BIOS and additional firmware for SBC 5400 and 7000 series. 

  2. Upgrading SBC Application

    Info
    iconfalse
    titleNote

    This step upgrades OS for 5xx0, 5400, and 7000 series and BIOS for the 5xx0 series.

The Standalone and HA upgrade flows below are are shown for general guidance. Actual software and firmware versions may vary depending upon the upgrade path:

Standalone Upgrade

Hide If
matchall
groupconfluence-users
Info

Please login to view the latest Release Notes prior to initiating your upgrade.

Show If
matchall
groupconfluence-users
Info

Refer to the latest Release Notes for release details prior to initiating your upgrade.

Note

The Platform Manager (PM) is available and must be used only from SBC release 3.0.0 or later. The LSWU upgrade is not supported directly from 3.0.0 to 5.0.0 release.

Caption
0Figure
1Standalone Upgrade Flow Diagram

Pagebreak

HA Upgrade

Hide If
matchall
groupconfluence-users
Info

Please login to view the latest Release Notes prior to initiating your upgrade.

Show If
matchall
groupconfluence-users
Info

Refer to the latest Release Notes for release details prior to initiating your upgrade.

Note

The Platform Mode (PM) is available, and must be used from SBC release version 3.0.0 or later.

Caption
0Figure
1HA Upgrade Flow Diagram

Pagebreak