Versions Compared

Old Version 3

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 4

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1
JIRAIDAUTHSBX-67552
REV5
REV6
REV3
REV1

Panel

In this section:

Table of Contents
maxLevel4

 

SIP Active Group Registration Status

Active SIP group registration status for a list of SIP endpoints.

Command Syntax

Code Block
languagenone
> show table addressContext <addressContext_name> sipActiveGroupRegStatus <id>
aorName | contactURI | creationTime | extExpirationTime | intExpirationTime | nextHopIpAddress | nextHopPortNum | regIdIsChild | registrarDomainName | registrarIpAddress | registrarPortNum | state

Multiexcerpt
MultiExcerptNameSIPActiveGroupRegistrationStatus

Command Parameters

Caption
0Table
1SIP Active Group Registration Status Parameters
3SIP Active Group Registration Status Parameters
ParameterDescription
aorName

The E.164 number and host portion plus optional BGID representing the Address of Record of the registering endpoint.

contactURI

The SIP CONTACT URI header.

creationTime Octet string that identifies the date and GMT time at which the SIP registration is initiated.
extExpirationTime The external expiration timer value in seconds.
intExpirationTime 

The internal expiration timer value in seconds.

nextHopIpAddress 

Next hop TSAP IP address.

nextHopPortNum 

Next hop TSAP UDP port number.

regIdIsChild 

Flag to optionally display results where the specified next registration ID is a child.

registrarDomainName

SIP registrar's domain name.

registrarIpAddress

SIP registrar's IP address.

registrarPortNumSIP registrar's UDP port number.
regTypeThis field indicates the type of registrations. The registration type can be 'normal' or 'emergency'.

state

The registration state of the endpoint: <challenged | completed | deleting | expired | initiating | null | refreshing | terminated | updating>

See Registration State Descriptions table below.

Caption
0Table
1Registration State Descriptions
StateDescription
challenged 

401 received from Registrar and relayed to UAC.

completed 

Successful response received from Registrar and relayed to UAC.

deleting Unregister received from UAC.
expiredRegistration expired.
initiating

Resister sent to Registrar and waiting for response.

null

Initial state, waiting for Route response.
refreshing 

Register Refresh request sent to Registrar and waiting for response. 

terminated Failure other than 401 or no response from Registrar.
updating 

Modify request sent to Registrar and waiting for response.

 

 

 

SIP Active Group Registration Summary Status

The active SIP group registration summary for a list of SIP endpoints.

Command Syntax

Code Block
languagenone
> show table addressContext <addressContext_name> sipActiveGroupRegSummaryStatus

Multiexcerpt
MultiExcerptNameSIPActiveGroupRegistrationSummaryStatus

Command Parameters

Caption
0Table
1SIP Active Group Registration Summary Status Parameters
3SIP Active Group Registration Summary Status Parameters
ParameterDescription
aorName The E.164 number and host portion plus optional BGID representing the Address of Record of the registering endpoint.
nextRegId The next registration ID.
nextRegIdIsChildDisplays the next registration ID if it is a child.
registrarIpAddressRegistrar IP address.
registrationType Registration type. The registration type can be 'normal' or 'emergency'.

state 

The registration state of the endpoint: <challenged | completed | deleting | expired | initiating | null | refreshing | terminated | updating>

See Registration State Descriptions table below.

Caption
0Table
1Registration State Descriptions
StateDescription
challenged 

401 received from Registrar and relayed to UAC.

completed 

Successful response received from Registrar and relayed to UAC.

deleting Unregister received from UAC.
expiredRegistration expired.
initiating

Resister sent to Registrar and waiting for response.

null

Initial state, waiting for Route response.
refreshing 

Register Refresh request sent to Registrar and waiting for response. 

terminated Failure other than 401 or no response from Registrar.
updating 

Modify request sent to Registrar and waiting for response.

 

 

SIP Active Register Name Status

The active SIP registration name status for a list of SIP endpoints.

Command Syntax

Code Block
languagenone
> show table addressContext <addressContext_name> sipActiveRegisterNameStatus

Multiexcerpt
MultiExcerptNameSIPActiveRegisterNameStatus

Command Parameters

Caption
0Table
1SIP Active Register Name Status Parameters
3SIP Active Register Name Status Parameters
ParameterDescription
nameAoR name.
contactURI  SIP CONTACT URI header.
creationTime  Octet string identifying date and GMT time at which the SIP registration is initiated.
e2aeMediaSecurity  

Media-security status of the UE in the registration record <sdes-srtp or none>. If set to sdes-srtp, UE has e2ae (end-to-access edge) capability.

endPointBehindNapt 

If value is“1”, the registered endpoint is behind NAPT; otherwise, value is “0”.

externalExpirationTime 

The time left, in seconds, before registration expires towards the end point.

internalExpirationTime 

The time left, in seconds, before registration expires towards the AS.

isRoaming 

A value of "1" indicates registered UE is roaming (not on home network). Otherwise, value is "0".

natPinholeLearningStatus 

NAT pinhole learning process status. <aborted-due-to-traffic | completed | completed-due-to-timeout | disabled | none | progressing>

nextHopIpAddress 

Next hop Transport Service Access Point (TSAP) IP address.

nextHopPortNum 

Next hop TSAP UDP port number.

registrarDomainName 

The SIP registrar's domain name.

registrarIpAddress 

SIP Registrar's IP Address.

registrarPortNum 

SIP Registrar's UDP port number.

regType

This field indicates the type of registrations. The registration type can be 'normal' or 'emergency'.

securityMechanismType 

The security mechanism type used for this registration. <ipsec-3gpp | none | tls>

state 

The registration state of the endpoint: <challenged | completed | deleting | initiating | null | refreshing | terminated | updating>

See Registration State Descriptions table below.

transportProtocolToAS 

The transport protocol used on access toward AS.

transportProtocolToEndpoint 

The transport protocol used on access towards the endpoint.

viaHeaderAddress 

The IP address of the bottom-most Via header of a SIP Message populated by the very first originator of the REGISTER request.

Caption
0Table
1Registration State Descriptions
3RegStateDesc
StateDescription
challenged 

401 received from Registrar and relayed to UAC.

completed 

Successful response received from Registrar and relayed to UAC.

deleting Unregister received from UAC.
initiating

Resister sent to Registrar and waiting for response.

null

Initial state, waiting for Route response.
refreshing 

Register Refresh request sent to Registrar and waiting for response. 

terminated Failure other than 401 or no response from Registrar.
updating 

Modify request sent to Registrar and waiting for response.

SIP Deleted Registration Status

The SIP registration status for a list of deleted SIP endpoints.

Command Syntax

Code Block
languagenone
> show table addressContext <addressContext_name> sipDeletedRegStatus

Multiexcerpt
MultiExcerptNameSIPDeletedRegistrationStatus

Command Parameters

Caption
0Table
1SIP Deleted Registration Status Parameters
3SIP Deleted Registration Status Parameters
ParameterDescription
id 

SIP endpoint ID

aorName   

The E.164 number and host portion plus optional BGID representing the address Of Record of the registering endpoint.

contactURI 

The SIP CONTACT URI header.

creationTime 

Octet string that identifies the date and GMT time at which the SIP registration is initiated.

nextHopIpAddress 

Next hop Transport Service Access Point (TSAP) IP address.

nextHopPortNum 

Next hop TSAP UDP port number.

reasonCode 

Registration termination reason. <configProblem | endpointInitiated | internalError | none | regTimerExpired | registrationMoved | registrationRejected | serviceUnavailable>

registrarDomainName 

The SIP registrar's domain name.

registrarIpAddress 

SIP registrar's IP address.

registrarPortNum 

SIP registrar's UDP port number.

terminationTime

Date and GMT time at which the SIP registration is terminated.

 

SIP Deleted Register Name Status

The deleted SIP registered name for a list of SIP endpoints.

Command Syntax

Code Block
languagenone
> show table addressContext <addressContext_name> sipDeletedRegisterNameStatus

Multiexcerpt
MultiExcerptNameSIPDeletedRegisterNameStatus

Command Parameters

Caption
0Table
1SIP Deleted Register Name Status Parameters
3SIP Deleted Register Name Status Parameters
Parameter
Description
aorNameThe E.164 number and host portion plus optional BGID representing the Address Of Record of the registered endpoint.
idThe registration ID created for the registration session.
reasonCodeThe registration termination reason.
contactURIThe SIP CONTACT URI header.
nextHopIpAddressNext hop IP address.
nextHopPortNumNext hop TSAP UDP port number.
registrarIpAddressRegistrar's IP address.
registrarPortNumSIP registrar's UDP port number.
creationTimeOctet string that identifies the date and GMT time at which the SIP registration is initiated.
terminationTimeOctet string that identifies the date and GMT time at which the SIP registration is terminated.
registrarDomainNameThe SIP registrar's domain name.

SIP Registration Count Statistics

Displays the SIP registration count statistics for the SIP endpoints or node.

Command Syntax

Code Block
languagenone
> show table addressContext <addressContext_name> sipRegCountStatistics
	sipRegCountAttempts
	sipRegCountCumCompletions
	sipRegCountPending
	sipRegCountStable
	sipRegCountTotal

 

Multiexcerpt
MultiExcerptNameSIPRegistrationCountStatistics

Command Parameters

Caption
0Table
1SIP Registration Count Statistics Parameters
3SIP Registration Count Statistics Parameters
ParameterDescription
subscription 

Name of the subscription.

sipEmergencyRegAcceptTotal

The total number of accepted emergency SIP registrations.

sipEmergencyRegActiveTotal

The total number of active emergency SIP registrations.

sipRegCountAttempts

Number of SIP registration attempts on SBC.

sipRegCountCumCompletions 

Accumulative number of completed SIP registration attempts.

sipRegCountPending

Current number of pending SIP registrations.

sipRegCountStable 

Current number of stable SIP registrations.

sipRegCountTotal 

The total number of current SIP registrations.

 

Pagebreak