Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
---|
ConfigIEState | No | Yes | Enum | 1 | Possible values: - 0 - esDISABLED
- 1 - esENABLED
| Specifies the Administrative State of the resource. |
---|
TransformationTable | Yes | No | int | 1 | Possible values: - 0 - Minimum
- 65534 - Maximum
| Sets the Transformation table to use for this call route. |
---|
RoutePriority | Yes | No | int | 1 | Possible values: | Priority of the route, 1 is the highest, 10 the lowest. Higher priority routes are matched against before lower priority routes regardless of the order of the routes in the table. |
---|
CallPriority | Yes | No | Enum | 1 | Possible values: - 0 - e_CALL_PRIORITY_NON_URGENT
- 1 - e_CALL_PRIORITY_NORMAL
- 2 - e_CALL_PRIORITY_URGENT
- 3 - e_CALL_PRIORITY_EMERGENCY
| Priority of the call. Used for emergency call identification by dial plan in routing table |
---|
QualityMetricCalls | Yes | No | int | 10 | Possible values: | Specifies the number of calls over which the quality metrics are calculated. |
---|
QualityMetricTime | Yes | No | int | 10 | Possible values: | Specifies the time in minutes after which a route is tried again after failing quality metrics. |
---|
QualityMinASRThreshold | Yes | No | int | 0 | Possible values: | Specifies the minimum answer/seizure ratio for this rule to be considered for use. |
---|
QualityMaxRoundTripDelayThreshold | No | No | int | 65535 | Possible values: - 0 - Minimum
- 65535 - Maximum
| Specifies the maximum average round trip (R/T) delay for this rule to be considered for use. |
---|
QualityMaxJitterThreshold | No | No | int | 3000 | Possible values: - 0 - Minimum
- 3000 - Maximum
| Specifies the maximum average jitter for this rule to be considered for use. |
---|
QualityMinLQMOSThreshold | No | No | int | 0 | Possible values: | Specifies the minimum average MOS (mean opinion score) value for this rule to be considered for use, in tenths (e.g.: "2.5" is configured as "25"). Setting this value to 0 disables the Minimum MOS threshold. Otherwise, the allowed values are between 10 and 50 (1.0 - 5.0). |
---|
DestinationType | Yes | No | Enum | 0 | Possible values: - 0 - dtOther
- 1 - dtRegistrarTable
- 2 - dtDeny
- 3 - dtTrunkGroup
| Specifies the type of destination for calls. |
---|
DenyCauseCode | No | No | int | 16 | Possible values: | Specifies the cause code to use for Deny type destionations. |
---|
MediaSelection | No | No | int | 0 | Possible values: - 0 - Minimum
- 65534 - Maximum
| Specifies the Media List Profile to use for this Call Route. |
---|
MediaMode | Yes | No | Enum | 0 | Possible values: - 0 - amodet_RtpDSP
- 1 - amodet_RtpProxy
- 2 - amodet_RtpProxyPreferred
- 3 - amodet_RtpDSPPreferred
- 4 - amodet_RtpNone
- 5 - amodet_RtpDirect
| Determines Audio media mode for SIP calls. Note that when choosing Direct Mode, the valid Video/Application Stream Mode can only be Direct/Disabled. |
---|
VideoMediaMode | Yes | No | Enum | 0 | Possible values: - 0 - vmodet_RtpNone
- 1 - vmodet_RtpProxy
- 2 - vmodet_RtpDirect
| Determines Video media mode for SIP calls. Note that when choosing Direct Mode, the valid Audio/Fax Stream Mode can only be Direct/Disabled. |
---|
MediaTranscoding | Yes | No | Enum | 0 | Possible values: | Controls whether or not to use Media Transcoding. Warning |
---|
Transcoding requires a specific Transcoding License. Do not enable Media Transcoding unless your calling configuration requires it and Sonus the SBC Edge is licensed for the transcoding feature. If this option is enabled without a trancoding license, a Critical Alarm will be generated even if the calls being routed don't need to be transcoded. |
|
---|
CancelOthersUponForwarding | Yes | No | Enum | 0 | Possible values: | Controls whether forked calls should clear when one of the forked calls is forwarded. |
---|
CallForked | Yes | No | Enum | 0 | Possible values: | Controls whether to fork a call if this route is selected. |
---|
ReRouteTable | No | No | int | 0 | Possible values: - 0 - Minimum
- 65534 - Maximum
| Specifies which Cause Code Reroute Table to use. None means no cause code rerouting is used. |
---|
MessageTranslationTable | No | No | int | 0 | Possible values: - 0 - Minimum
- 65534 - Maximum
| Specifies which Message Translation Table to use. None means no message translation is used. |
---|
SignalingGroupList | Yes | No | string | 1 | 40 - Max Length | Specifies the Signaling Groups used as the destination of calls provided as a comma-separated string of the Signaling Group IDs. Not applicable when the Destination Type is Deny or Trunk Group. |
---|
Description | No | No | string | none | 64 - Max Length | Describes the Call Route Table Entry so that it is easily identifiable when re-sequencing Entries. |
---|
MaximumCallDuration | No | No | int | 0 | Possible values: - 0 - Minimum
- 10080 - Maximum
| Specifies the maximum duration that a call can stay connected in minutes. A zero value will disable this timer. |
---|
TimeOfDay | No | No | int | 0 | Possible values: - 0 - Minimum
- 65534 - Maximum
| Specifies which Time Of Day restrictions apply to this call route. None means there is no time of day restriction. |
---|