Page History

img.confluence-embedded-image
{ display: inline-block !important; }

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, click on Time of Day Table.

3. Click the Add ( ) icon at the top of the Time of Day Tables page.

4. Enter a table description.

5. Click OK.

   Panel
   borderStyle none
   Caption 0 Figure 1 Create Time of Day Table - Example  Image Modified

   Panel
   borderStyle none
   Caption 0 Figure 1 Time of Day Table - Example Image Modified

Step 2: Create an entry to a Time of Day Table

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, click on the desired Time of Day Table.

3. Click the Create Time of Day Entry ( ) icon.

4. Configure the fields as shown below. For field descriptions, refer to Time of Day Entry - Field Definitions.

   Info
   If the Start Time and Stop Time are the same, or if the Start Time and Stop Time are both empty, the Time of Day entry applies all day. If the Start Time is greater than the Stop Time, the Time of Day entry applies from the Start Time until the Stop Time on the next day. A blank entry entry specifies all days or hours.

5. Click OK.

   Panel
   borderStyle none
   Caption 0 Figure 1 Create Time of Day Entry - Example

   Pagebreak

Step 3: Map the Time of Day Entry to a Call Routing Table

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, click on the desired Call Routing Table.
3. Select the desired Call Routing Table (or create a new one, refer to Managing Call Routing Tables).
4. Click the ( ) icon.
5. Configure with the Time of Day entry (i.e., Time 1). 

6. Click OK.
   pagebreak

   Panel
   borderStyle none
   Caption 0 Figure 1 Create Call Routing Entry

    

   Pagebreak