...
Add_workflow_for_techpubs | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Excerpt Include | ||||||
---|---|---|---|---|---|---|
|
...
Note | ||||
---|---|---|---|---|
Perform these steps on both
|
Step | Action | |
---|---|---|
1 | Login to the WebUI of each SBC Edge. | |
2 | Navigate to Tasks > Office 365 Cloud Connector Edition> Setup. | |
3 | Click the ASM Config tab and configure/verify the Network and IP settings of your ASM as shown below. | |
4 | From the Remote Desktop Enabled drop down list, select Yes (to enable Remote Desktop) or No (to disable Remote Desktop). | |
5 | From the Windows Firewall Enabled drop down list, select Yes (to enable Windows Firewall) or No (to disable Windows Firewall). | |
6 | From the Proxy Enabled drop down list, Enables use of the Proxy Server on the ASM. Select from the drop down list: Yes (enables Proxy Server on the ASM) or No (disables Proxy Server). | |
7 | From the Proxy Address drop down list, select Yes (to enable the IP address for the Proxy Server in IPv4 format). This field is available only when Proxy Enabled is set to Yes. | |
8 | From the Proxy Port drop down list, select Yes (to enable the port in which the Proxy Server connects). Valid entry: Valid entry: 1 - 65000. This field is available only when Proxy Enabled is set to Yes. | |
9 | Configure/verify the Network and IP settings of your ASM. | |
10 | Click Apply. After receiving the activity status as successfully completed, click the Generate CSR tab. |
Caption | ||||
---|---|---|---|---|
| ||||
Caption | ||||
---|---|---|---|---|
| ||||
...