Page History

...

• SBCSWeLite-disk1.qcow2
• SBCSWeLite-disk2.qcow2
• SBCSWeLite-disk3.qcow2

...

1. Start the Virtual Machine Manager.
   

   Caption
   0 Figure 1 Start Virtual Machine 3 Start Virtual Machine
   Image Modified

2. Select New Virtual Machine from the File drop-down menu.

   Caption
   0 Figure 1 New Virtual Machine 3 New Virtual Machine
   Image RemovedImage Added

3. From the Create New Virtual Machine dialog, select Import existing disk image and click Forward.

   Caption
   0 Figure 1 Create New Virtual Machine 3 Create New Virtual Machine
   Image Modified

4. Select Linux from the OS type drop-down menu.
   

5. Select Debian Squeeze from the Version drop-down menu  .

6. Click Browse and navigate to the location of the disk image.
    

   Caption
   0 Figure 1 Storage Path 3 Storage Path
   Image Added Image Removed

7. From the Choose Storage Volume dialog, select file SBCSWeLite-disk1.qcow2, then click Choose Volume.

   Caption
   0 Figure 1 Choose Volume 3 Choose Volume

8. Click Forward.

   Caption
   0 Figure 1 OS Type and Version 3 OS Type and Version
   Image Modified

9. Set Memory (RAM) field to 1024 and CPUs field to 1, and click Forward.

   Caption
   0 Figure 1 Memory and CPU Settings 3 Memory and CPU Settings
   Image Modified

10. Enter the name of your new VM in the Name field.
11. Select the Customize configuration before install option.

12. From the New VM dialog, select the applicable network from the Network selection drop-down menu, and click Finish.

    Note
    title icon false Note
    This is the network used for the Management Interface.

    Caption
    0 Figure 1 Finalizing Create New Virtual Machine 3 Finalizing Create New Virtual Machine
    Image Modified

Customize Configuration

...

1. In the new pop-up window, select Disk 1 (VirtIO or IDE).

2. Expand Advanced options and select IDE from the Disk bus drop-down menu.

3. Select qcow2 from the Storage format drop-down menu and click Apply.
   
    

   Caption
   0 Figure 1 Adding Hardware 3 Adding Hardware
   Image Modified

   
   

4. Click Add Hardware.
5. Select Storage.

6. Select Select or create custom storage. 
   

7. Navigate to file SBCSWeLite disk2.qcow2, and click Finish.
   

   Caption
   0 Figure 1 Managing Storage 3 Managing Storage
   Image Modified

8. Repeat steps 4-7 6 for IDE Disk 3.
   

   Caption
   0 Figure 1 Repeat for Disk Three 3 Repeat for Disk Three
   Image Modified

    

Modify Network Interface Device Model

1. Select NIC.

2. Select e1000 from the Device model drop-down menu, then click Apply.
   

   Caption
   0 Figure 1 Modify Virtual Network Interface 3 Modify Virtual Network Interface
   Image Modified

Add Virtual Network Interfaces

1. Click Add Hardware.
2. From the Add New Virtual Hardware dialog, select Network.
3. Select the desired Bridge id from the Network source drop-down menu.
4. Select e1000 from the Device model drop-down menu, and then click Finish.

Repeat steps 1-4 for additional Network Interfaces.

...

Finalize Installation

1. From the Virtual Machine dialog, click Begin installation.

   Caption
   0 Figure 1 Begin Final Installation 3 Begin Final Installation
   Image Modified

   Note
   title icon false Note
   The configured VM starts automatically as shown below.

   Caption
   0 Figure 1 SBC SWe Lite Running 3 SBC SWe Lite Running

2. Click the monitor icon in the header to open the VM console and proceed with the 

   Spacevars
   0 series3

   initial setup.
   

   Caption
   0 Figure 1 Open VM Console 3 Open VM Console
   Image Modified

   
   

3. To stop the VM, right-click on the desired Virtual Machine and select Shut Down, and then Force Off.
   

   Caption
   0 Figure 1 Shut Down/Force Off 3 Shut Down/Force Off
   Image Modified

children