Page History

Add_docset_workflow
APPRJID SYM-21010 AUTH1 DEV1 LDEV1 SVT1 LSVT1 AUTHJID SYM-20480

Sonus SBC 1000

The

Spacevars
0 series

has three Ethernet ports used for communicating with the IP network. All SIP traffic is carried on these two ports. Unlike the SBC 2000, this model has no dedicated Management Port.

Info
The third Ethernet port on the SBC 1000 is available only if running SBC 1000 v2 hardware. For hardware details, see Sonus SBC 1000 Hardware Specifications.

Sonus SBC 2000

The

Spacevars
0 series2

has four Ethernet ports and one Ethernet Management port. By default, each of the four non-management ports are in their own system created VLAN, and are isolated from one another.

ASM

If the unit is equipped with a built-in ASM, all ASM traffic is carried uniquely through this Ethernet port.

Info
icon false
For communication between the Spacevars 0 longproduct and the ASM to work properly, the ASM port's Default Untagged VLAN must be set to a VLAN whose logical IP address is in the same subnet as the ASM's IP address. For example, if the ASM port's default VLAN is set to Ethernet 1 VLAN, then the logical interface Ethernet 1 IP must have its IP address in the same subnet as the ASM IP.

Working with Ethernet Ports:

1. In the WebUI, click the Settings tab.

2. In the left navigation pane, go to Node Interfaces > Ports. See below for examples.