Page History
| Add_workflow_for_techpubs | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Table of Contents |
|---|
Prerequisite
Copy the following disk image files to disk storage location (typically /var/lib/libvirt/images) on the host machine.
- SBCSWeLite-disk1.qcow2
- SBCSWeLite-disk2.qcow2
- SBCSWeLite-disk3.qcow2
| Note | ||||
|---|---|---|---|---|
| ||||
SBC SWe Lite supports one Network Management interface and up to four Network Media interfaces. The minimal networking configuration (one management and one media interface) requires two bridge interfaces configured on Hyper Visor host. To support maximum 1+4 configuration, Hyper Visor host must have five bridge interfaces configured prior the VM installation. |
| Note | ||||
|---|---|---|---|---|
| ||||
SWe Lite requires a DHCP server to assign the management IP address initially. The address can be later manually changed through webUI interface. |
Select Import existing disk image.
- Select Browse.
- Navigate to the storage path.
- Select file SBCSWeLite-disk1.qcow2.
- Select Choose Volume.
- Select Forward.
- Set Memory (RAM): field to 512.
- Set CPUs: field to 1.
- Select Forward.
- Enter the name of the VM in the Name field.
- Select Customize configuration before install checkbox.
Select the applicable Network from the Network selection drop-down menu.
Note icon false title Note This is the Network used for Management Interface
Customize Configuration
Modify the Disk Bus
Select VirtIO Disk 1.
- Expand Advanced options and select IDE from the Disk bus drop-down menu.
- Select Add Hardware.
- Click Apply.
Modify Network Interface Device Model
- Select NIC.
- Select e1000 from the Device model drop-down menu.
- Select Add Hardware.
Add Virtual Network Interfaces
- Select Network.
- Select the desired Bridge id from the Network source drop-down menu.
- Select e1000 from the Device model drop-down menu.
- Select Finish.
- Repeat these steps for additional Network Interfaces.
...
| title | PLACEHOLDER PAGE |
|---|
...
Note icon false title Notes The SWe Lite Virtual Machine requires five Virtual Network Interfaces configured, regardless of the actual number of Networks used by the guest VM.
The first Virtual NIC must use a dedicated bridge (Network source). The Network source can then be used when configuring the remaining four Virtual NIC's.
Finalize Installation
Select Begin Installation.
Note icon false title Note The configured VM starts automatically as shown below.
| Children Display |
|---|
Overview
Content Tools