Page History

 ???

 Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port

 ???

 ???

 ???

 IP address (IPv4 or IPv6) of the DNS server.

Specifies the physical T1/E1 port used for this Signaling Group. Valid option: T1 or E1.

The Pool name of the Lync Server (FQDN).

physical T1/E1 port number to which the PSTN line is physically connected. DS1 entries are configured with the following command buttons: Up (move a DS1 port up in the list), Down (move a DS1 port down in the list), Add (adds a DS1 port), and Remove (deletes a DS1 port).

For example, click Add. Select the desired PSTN port and OK.

Specifies the ISDN variant for the port type in the ISDN Signaling Group.

For T1

• ATT 4EES
• ATT 5EES
• DMS 100
• N12
• Euro ISDN
• QSIG
• Japanese ISDN

For E1:

• Euro ISDN
• QSIG

options: Translation Extension (translates digits into phone extensions) or Passthrough Untranslated (does not translate digits).

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Hostnumber of digits used to account for the PSTN extension. Valid options: 2, 3, 4, or 5.This field is available only when ISDN Number Translation is set to Translation Extension.