Page History

...

1. Connect to the Domain Controler through Remote Desktop (RDP) using your regular AD credentials.
2. Launch the Active Directory Users and Computers snap-in.
3. Browse down to Users object (on the left pane).
4. Right-click RTCComponentUniveralServices group and select Properties
5. Click ADD in the the Members tab.
6. In the popup, enter the ASM machine name.

7. Click Check Names.

   Panel
   borderStyle none
   Caption 0 Figure 1 Add To to RTCComponentUniversalServices Group

8. Click OK.
9. Click OK to close the properties screen.

...

1. Connect to the Domain Controler through Remote Desktop (RDP) using your regular AD credentials.
2. Launch the Active Directory Users and Computers snap-in.
3. Browse down to Users object (on the left pane).
4. Right-click RTCUniversalReadOnlyAdmins group and select Properties
5. Click ADD in the the Members tab.
6. In the popup, enter the ASM machine name.

7. Click Check Names.

   Panel
   borderStyle none
   Caption 0 Figure 1 Add To to RTCUniversalReadOnlyAdmins Group

8. Click OK.
9. Click OK to close the properties screen.

...

1. Configure the ASM IP Settings
2. Join the ASM to a Domain
3. Perform Step 1 (Prepare the SBA)  of the Deploying the SBA Best Practice article.
4. You need to accept the SIP NOTIFY traffic from the QoE Agent Client Gateway by creating or reusing a signaling group (see Creating and Modifying SIP Signaling Groups) to accept SIP traffic from Client. The listening port will be the port provide in the System tab of the QoE Agent Client Gateways. 
   
5. To configure the QoE service as a Server:
     
   1. In the WebUI, click the Settings tab.

   2. In the left navigation pane, go to System > QoE.

      Panel
      borderStyle none
      Caption 0 Figure 1 Configure QoE Service As as Server

   3. In the QoE Service panel, select Server from the QoE Agent Type list box.
   4. Click Apply.

...

1. In the WebUI, click the Settings tab.

2. In the left navigation pane, go to System > Signaling Groups > your Lync signaling group.

   
   

    

   Panel
   borderStyle none
   Caption 0 Figure 1 Enable QoE Reporting

3. In the SIP Channels and Routing Panel, select Enabled from the QoE Reporting list box.
4. Click Apply.

...

1. In the WebUI, click the Settings tab.

2. In the left navigation pane, go to System > Media > Media List > your SIP Trunk Media List

   Panel
   borderStyle none
   Caption 0 Figure 1 Enable RTCP-XR

3. Select RTCP-XR in the RTCP Mode list box
4. Click Apply.

...

...

...

...