Page History

IN PROCESS

The SWe Lite supports up to 4 vCPUs and 4 Gib of RAM (memory). To increase the number of vCPUs and memory in the SWe Lite system after initial installation, edit the VM settings and reboot. See instructions below, according to the installation type.

SWe Lite on KVM Hypervisor

SWe Lite on Microsoft Hyper-V

SWe Lite on VMware ESXi

Access the desired VM with the desired SWe Lite instance.

Click Edit virtual matchine settings

In Memory Size, update the amount of memory.

Change the number of vCPUs...

Reboot the VM.

Continue on with Running Initial Setup?

Starting in 7,0, the SWe Lite supports the following:

• For Memory (RAM), valid settings are 1 GiB, 2 GiB, or 4 GiB.
• For vCPUs, valid settings are 1, 2 or 4 CPUs.

Update vCPU and RAM

SWe Lite on KVM Hypervisor

1. Login into a terminal access software (such as Putty), and log into the KVM server.
2. From the list, click on the applicable VM instance.
3. Power down the VM.
4. Select Edit > Virtual Machine Details
5. Select View > Details or click the Image Addedicon

6. From the menu, click CPUs.The SWe Lite supports 1, 2, or 4 vCPUs. 

   Caption
   0 Figure 1 Add vCPUs
   Image Added

7. Click Apply.

8. From the menu, click Memory. Each SWe Lite instance with 1 vCPU requires 1024 MiB (1GiB) RAM; this amount is increased according to the number of vCPUs. See Adding vCPU and Increasing Memory.

   Caption
   0 Figure 1 Update Memory
   Image Added

9. Click Apply.
10. Restart the VM instance.

To verify the updated values, see Adding vCPU and Increasing Memory.

SWe Lite on Microsoft Hyper-V

1. Launch Hyper-V Manager from the Windows Start menu.
2. Power down the VM in which you will be adding vCPUs and RAM.
3. Right-click on the desired VM instance and select Settings.
4. Click on Memory. Each SWe Lite instance with 1 vCPU requires 1024 MiB (1GiB) RAM; this amount is increased according to the number of vCPUs. See Adding vCPU and Increasing Memory.
   

    

   Caption
   0 Figure 1 Add memory
   Image Added

5. Enter the desired memory and click OK.

6. Click on Processor. The SWe Lite supports 1, 2, or 4 vCPUs.

    

   Caption
   0 Figure 1 Add vCPUs
   Image Added

7. Enter the desired virtual processors and click OK.

To verify the updated values, see Adding vCPU and Increasing Memory.

SWe Lite on VMware ESXi

Add a vCPU and increase RAM on the VM instance as following:

1. Access vSphere Client.
2. Click on the applicable VM instance
3. Power down the VM.
4. From the Getting Started tab, click Edit virtual machine settings.

5. From the Hardware tab, click Memory.

    

   Caption
   0 Figure 1 Add Memory
   Image Added

6. Update the desired memory size. Each SWe Lite instance with 1 vCPU requires 1024 MiB (1GiB) RAM; this amount is increased according to the number of vCPUs. See Adding vCPU and Increasing Memory.

7. From the Hardware tab, click CPUs.

   Caption
   0 Figure 1 Add vCPUs
   Image Added

8. Update the desired number of vCPUs. The SWe Lite supports 1, 2, or 4 vCPUs.
9. Click OK.
10. Restart the VM instance. The SWe Lite is configured with the updated values.

To verify the updated values, see Adding vCPU and Increasing Memory.

Verify Update on SWe Lite

1. Connect to the applicable SWe.
2. In the WebUI, access System > Overview.

The number of virtual CPUs and Total System Memory is updated: 

...