Page History
...
Host information, DNS settings, and other Node-Level options are configured in the
| Spacevars | ||
|---|---|---|
|
...
To change the host information for your Sonus SBC 1000/2000
:Spacevars 0 product
- In the WebUI, click the Settings tab.
In the left navigation page, go to System > Node-Level Settings.
Panel borderStyle none Caption 0 Figure 1 Node-Level Settings
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies whether or not the Sonus SBC 1000/2000 uses DNS. Available options: Yes or No. This field is available only if Node-Level Network Settings is set to Static. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
When enabled, the Sonus SBC 1000/2000 accepts DNS requests, and either serves them locally or forwards them as necessary. Valid entry: Yes (DNS request is forwarded or served locally as necessary) or No (DNS requests are not handled by the SBC). Default entry: No. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Determines whether or not the Sonus SBC 1000/2000 behaves as a DHCP server (grants leases to other hosts on the network). |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
This field is automatically populated with the current status of the Power LED. Options are: Green (indicates the system is connected to a power source) or Off (unit is not connected to power source). For additional information about the Power LED's color and status definitions, see Sonus SBC 1000-2000 Status LEDs. |
Alarm LED
| Panel | ||||
|---|---|---|---|---|
| ||||
This field is automatically populated with the current status of the Alarm LED on the front panel. Possible entries: Green (no alarm), Off (warning), Amber (minor alarm), Red (major alarm), Red Blinking (critical alarm). For additional information about the Alarm LED's color and status definitions, see Sonus SBC 1000-2000 Status LEDs. |
Ready LED
| Panel | ||||
|---|---|---|---|---|
| ||||
This field is automatically populated with the current status of the Ready LED on the front panel. Options are: Green (indicates the system is fully initialized) or Off (system is not fully initialized). For additional information about the Ready LED's color and status definitions, see Sonus SBC 1000-2000 Status LEDs. |
Locator LED
| Panel | ||||
|---|---|---|---|---|
| ||||
This field provides the option to set the Locater LED on the front of the SBC unit to either Off (LED is off), On Green (LED is green) or Blinking Green (LED blinks one time per second). Default entry: On Green. This option helps network personnel easily locate the SBC unit in a rack with other equipment. This LED is also recognized as the Peer Node Status LED. For additional information about the Locator LED's color and status definitions, see Sonus SBC 1000-2000 Status LEDs. |
Configuring Node Level Options
...
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
|
Overview
Content Tools