Page History

...

Resetting the Admin Password

Simple Admin Password Recovery Procedure

...

1. Push and hold the reset button for 4 to 5 seconds. See the SBC 1000 Front Panel or  SBC 2000 Front Panel for details of button location.

   Note

   When the SBC has detected the 4-5 second Reset Button push, the four LEDs on the front panel will flash four (4) times. See SBC 1000 Front Panel or SBC 2000 Front Panel for details about the location of the LEDs. If the Reset Button is held for more than 6 seconds, the request will not be recognized and the push-and-hold operation must be repeated. Do Not hold the Reset Button for a period of more than 20 seconds or this will initiate a factory default (see below).

2. Login to the SBC using the system generated temporary admin username and password.
   1. Temporary user name: A + last 8 characters of the the SBC serial number (e.g., A12345678).
   2. Temporary password: same as the temporary user name.
3. Click the Settings tab at the top of the UI.

4. In the left navigation bar, go to: Security > Users > Local User Management.

   Panel
   borderStyle none
   Caption 0 Figure 1 Local Users Table

5. Click the Reset Password link in at least one Administrator level user row.

   Panel
   borderStyle none
   Caption 0 Figure 1 Reset User Password

6. Enter a new password in the Password field, then re-enter the password in the Confirm Password field.
7. Click OK.

...