Versions Compared

Old Version 5

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 6

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Panel
bgColor#FAFAFA
borderStylenone

Specifies the time (system time) at which the first AD Cache update occurs after initial SBC power up or after an AD Configuration has been edited and applied. This field is visible only when the Configure Initial Update Time field is set to True.

Info

The last saved AD Cache is used until the first update specified by this field occurs.

Info

On the SBC 2000 or the SBC 1000 (if it has an external external USB or ASM module), it is recommended to do the following

  1. Set Update Frequency to 1440 minutes (24 hours)
  2. Set Configure Initial Update Time to True
  3. Configure First Update Time in a 24 hour format

The preceding procedure ensures that the cache refresh will always occur at a desired time instead of a random time. Only increase the cache Update Frequency to occur more often if there are frequent changes to the Windows Domain Controller; otherwise, once every 24 hours should be sufficient.

AD Backup Failure Alarm

Panel
bgColor#FAFAFA
borderStylenone

When Enabled, the SBC will raise an alarm and send an SNMP Trap if the AD Cache backup fails. This parameter controls the alarm and trap generation only. It does not control the AD Cache backup function.

...