Page History

...

1. In the WebUI, click the Tasks tab.

2. In the left navigation pane, under the Lync™ Survivable Branch Appliance, click Test Lync™ Call.

   Panel
   borderStyle none
   Caption 0 Figure 1 Test Lync Call Image Modified

3. Enter the Destination PSTN Phone Number and the optionally the SIP URI Address

   Panel
   borderStyle none
   Caption 0 Figure 1 Enter Test Lync Call Information Image Modified

• The PSTN Phone Number is mandatory and should be in an E.164 format matching the Lync default dial plan.
• The SIP URI Address is an optional parameter. If used, it must be a valid user ID configured on the Lync server.
• Click OK.

Expected Outcome

The system will place a call from the Lync SBA to the SBC and expect the call to be routed via the PSTN number provided. Once the number is physically answered by a user, the call will automatically hang up and the webUI will return success. Note that no audio will be sent from the Lync SBA - the intent is to simply test the signalling and routing.

...