Page History

...

1. Access the WebUI.
2. Click Tasks > Setup Cloud Connector Edition > Configure CCE.

3. Click the link Click to re-configure CCE application.
   
   

   Caption
   0 Figure 1 Re-configure CCE Application

   
   
   

4. From the Raw (INI) Config drop down box, select Edit.
   
   
   

   Caption
   0 Figure 1 Edit CCE Screen

   
   
   

5. View the CCE Configuration INI File window; this window enables editing of the CCE Configuration File.

   Caption
   0 Figure 1 CCE Configuration INI File

6. In the INI file, scroll down to the section marked Gateway.

    

   Caption
   0 Figure 1 CCE Configuration INI File - Gateway Section

7. Change the Port to 5067 and Protocol to TLS.

8. Click OK.

   Caption
   0 Figure 1 Update Port and Protocol Fields

9. Click Tasks > Setup Cloud Connector Edition > Prepare CCE.

10. Click Click to re-prepare the CCE.

    Caption
    0 Figure 1 Re-Prepare the CCE

11. Scroll to the bottom of the window and click Prepare CCE.

    Caption
    0 Figure 1 Prepare CCE

12. Enter the CCE VM Password and click OK.

    Caption
    0 Figure 1 Enter VM Password

13. Remote desktop to the ASM (refer to Enabling and Disabling Remote Desktop on the ASM).
14. Run the Sonus

    Spacevars
    0 company

    CloudLink Deployer application from the icon on the desktop.
15. Click on the first three check boxes:
    
    • Transfer Credentials from SBC: Imports the password that has been set during Preparing the CCE.
    • Register Appliance: Registers this new appliance on your Office365 tenant.
    • Install Appliance: Deploys the CCE.

16. Click Apply.

    Caption
    0 Figure 1 Remote Desktop to the ASM

...