Page History

Accurate System timing is important for the proper operation of the Sonus SBC 1000/2000

Spacevars
0 product

. The system time may be sourced from different places depending upon the specific topology where the Sonus SBC 1000/2000 is

Spacevars
0 product

 is deployed. In some cases the Sonus SBC 1000/2000 itself

Spacevars
0 product

 itself may serve as a time source for the topology. In such cases, the Sonus SBC 1000/2000 may

Spacevars
0 product

 may use its own independent internal clock, or it may be synchronized with a network time source through Network Time Protocol (NTP). The NTP source may be a public source such as NTP.org or NIST, or a private source such as an internal enterprise time server.

The Sonus SBC 1000/2000 allows

Spacevars
0 product

 allows you to configure a maximum of two NTP time servers from which to source time and date information.

Configuring the

...

Spacevars
0 product

 to Use an NTP Server

To configure your Sonus SBC 1000/2000 to

Spacevars
0 product

 to use NTP:

1. In the WebUI, click the Settings tab.

2. In the left navigation pane, go to System > Node Level Settings.

3. Configure the fields in Time Management. See  Time Management - Field Definitions.

...

Panel
bgColor #FAFAFA borderStyle none
Specifies the host name or IP address of the first NTP server. If the hostname is supplied, the Sonus SBC 1000/2000 Spacevars 0 product uses DNS to connect to the NTP server.

...