Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Create a Analog Lync Transformation Table.
    This will be used by the Action Set.

    Panel
    borderStylenone

    Caption
    0Figure
    1Table - Is the Call to a Lync Analog Device?

     

     

  2. Create the Analog Lync Transformation Table entries.

    Panel
    borderStylenone

    Caption
    0Figure
    1Transformation Table Identifies Lync Analog Devices

     

     

    Info

    The search in the Transformation Table Entry is the result of the command you entered to enable the analog device, specifically, the OU. Note the corresponding analogEndPoints between the Lync command below and the translation entry above.

    New-CsAnalogDevice -LineUri tel:+15102462001 -DisplayName "Analogph1" -RegistrarPool cspool.uxdemo.net -AnalogFax $false -Gateway ux246.uxdemo.net -OU "ou=analogEndPoints,dc=uxdemo,dc=net"

    You can also run a Query Active Directory Cache test from the UX's Task Tab > Diagnostics Section in order to determine the OU name.

    Panel
    borderStylenone
    Caption
    0Figure
    1Active Directory Cache Query

    Image Modified

    none

    Tip

    Don't forget to add distinguishedName to the UX's list of AD attributes.

    Panel
    borderStyle
    Caption
    0Figure
    1Cache Settings

    Image Modified

     

    Create a Route to Lync

  1. Create a Transformation Table for Routing to Lync.
    This will be used by the Call Router.

    Panel
    borderStylenone

    Caption
    0Figure
    1The Preprogrammed Passthrough Untouched Transformation Table

     

     

  2. Create a Transformation Table Entry to route the call to Lync.
    If all the numbers have been processed and normalized correctly, you should be able to use the Passthrough Untouchedtransformation that is created when the Lync Task (wizard) is run.

    Panel
    borderStylenone

    Caption
    0Figure
    1The Passthrough Tranformation

     

     

  3. Create a Lync Call Routing Table

    Panel
    borderStylenone

    Caption
    0Figure
    1Call Routing Table - Lync Routes

     

     

  4. Create a Lync Call Routing entry to point the call to the Lync server.

    Panel
    borderStylenone

    Caption
    0Figure
    1A Route to the Lync Server

     

    Create the Ring No Answer (RNA) Action Set

...