Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1
JIRAIDAUTHN/ANA
REV5
REV6
JIRAIDAPPR2NA
REV3
JIRAIDAPPRNA
REV1REV2

To create or modify a Media List:

...

  1. Click the Create Media List ( ) icon at the top of the Media List View page.

    Image Added

    Caption

    0Figure
    1Create Media List dialog box

    Image Removed

     
    Anchor
    properties
    properties

...

Panel
bgColor#FAFAFA
borderStylenone

Specifies where or not to use Voice Activity Detection and send PT13 packets when on.

  • If Silence Suppression is enabled, the Sonus SBC 1000/2000 monitors outgoing audio (towards the IP network). If silence is detected, voice packet transmission will cease to save network bandwidth. The enable setting saves network bandwidth, however, voice quality may be slightly degraded.
  • If Silence Suppression is disabled, voice packets are sent regardless of whether or not audio is present.

...

  • .

Reset SRTP Rollover Counter

Panel
bgColor#FAFAFA
borderStylenone

For SRTP ROC, this configuration option specifies whether to reset the ROC or maintain the ROC. Available options: Start of Session (RFC 3711) (SBC will maintain the ROC, even if there is a key change) and Upon New Remote Session Key (the SBC will reset the ROC if the call is from Lync Mediation Server and SRTP key is changed). Default entry: Start of Session (RFC 3711).

This field is available only when the a Crypto Profile is selected from the Crypto Profile ID drop down box through creating or modifying a Media List. See Crypto Profile ID.

Gain Control - Field Definitions

...