Versions Compared

Old Version 2

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 3

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. From the Create Signaling Group drop down box, select SIP Signaling Group.

    Panel
    borderStylenone
    Caption
    0Figure
    1Create Signaling Group

    Image Modified

  2. Configure the field options. Field definitions below are listed in SIP Signaling Group feature groups. See Quick Links - Configuration Options by Feature.

    Panel
    borderStylenone
    Caption
    0Figure
    1Create Signaling Group

    Image Modified

Overview - Field Definitions

Panel
borderStylenone
Caption
0Figure
1SIP Signaling Group - Overview

Image Modified

 

Description

Panel
bgColor#FAFAFA
borderStylenone
Descriptive name for the signaling group.

...

SIP Channels and Routing - Field Definitions

Panel
borderStylenone
Caption
0Figure
1SIP Signaling Group - SIP Channels and Routing

Image Modified

 

Action Set Table

Panel
bgColor#FAFAFA
borderStylenone

Specifies a defined Action Set Table for this Signaling Group.

...

Media Information - Field Definitions

Panel
borderStylenone
Caption
0Figure
1SIP Signaling Group - Media Information

Image Modified

 

Audio/Fax Stream Mode

Panel
bgColor#FAFAFA
borderStylenone

Determines the streaming mode for audio, fax, and media transmission.

  • DSP: the audio/fax stream is processed using a DSP resource, and consumes a DSP license.
  • Proxy: the audio/fax stream is processed using the SBC internal processing resources and does not require a DSP resource or license.
  • Direct: the audio/fax stream is passed directly from one compatible end-point to another, this uses neither the SBC processor or a DSP resource.

All three options are enabled by default.

...

Panel
bgColor#FAFAFA
borderStylenone

Specifies how ringback is played on a channel.

Note
iconfalse

The Play Ringback configuration functions with only 180 Ringing or ISDN Alert. The function is not executed for 183 w/SDP.

  • Auto: Configured for Auto, the Sonus SBC 1000/2000 operates in the nominal RFC 3960pattern
    • Sonus SBC 1000/2000 generates ringback until in-band media arrives.
    • Sonus SBC 1000/2000-generated ringback is discontinued in the presence of in-band ringback.
    • Additionally, any ALERT is sent with PI=8 regardless of whether or not a SDP was received on the SIP side. Doing so allows the Sonus SBC 1000/2000 to send in-band audio without signaling PROGRESS.

Toggle Cloak
idPlayRingBackAuto
Click to see more information about this topic.

Cloak
idPlayRingBackAuto
BLOCK6pxBLOCK

Auto — SIP ↔ SIP

Auto — SIP/ISDN ↔ ISDN

  • Always:Sonus SBC 1000/2000 provides ringback, ignoring any arriving in-band media.
    • For SIP-originated call legs, 180w/SDP will be sent to permit Sonus SBC 1000/2000 to provide in-band ringback via early media.
    • For ISDN-originated call legs, ALERT+PI will be sent along with Sonus SBC 1000/2000-inband ringing.

Toggle Cloak
idPlayRingBackAlways
Click to see more information about this topic.

Cloak
idPlayRingBackAlways
BLOCK6pxBLOCK

Always — SIP ↔ SIP

Always — SIP/ISDN ↔ ISDN

  • Never:Sonus SBC 1000/2000 does not provide ringback and cuts through ringback from the source when/if it arrives.
    • With NEVER, Sonus SBC 1000/2000 will send 180/ALERT to the originating call leg without SDP/PI as in this configuration Sonus SBC 1000/2000 will not supply inband ringback.

Toggle Cloak
idPlayRingBackNever
Click to see more information about this topic.

Cloak
idPlayRingBackNever
BLOCK6pxBLOCK

Never — SIP ↔ SIP

Never — SIP/ISDN ↔ ISDN

(info) Note: The Play Ring Back setting is activated only after the channel receives an ALERT or 180 Ringing. Issues with ringback and 183 Session Progress must be addressed using a Message Translation.

Toggle Cloak
idPlayRingBackActivation
Click to see more information about Activating Play Ring Back.

Cloak
idPlayRingBackActivation

The Ringback setting will be activated if a Message Translation's output is ALERT/180.

BLOCK4pxBLOCK

The Ringback setting is not used for ISDN-to-ISDN calls when the ALERT contains a Progress Indicator. Sonus SBC 1000/2000 will always set the outgoing PI as it was received.

BLOCK4pxBLOCK

Tone Table

Panel
bgColor#FAFAFA
borderStylenone

Specifies the Tone Table used by this Signaling Group. Only visible if Always or Auto is specified for Play Ring Back.

...

Mapping Tables- Field Definitions

Panel
borderStylenone
Caption
0Figure
1SIP Signaling Group - Mapping Tables

Image Modified

 

SIP To Q.850 Override Table

...

SIP IP Details - Field Definitions

Panel
borderStylenone
Caption
0Figure
1SIP Signaling Group - SIP IP Details

Image Modified

 

Signaling/Media Source IP

...

If the selected Outbound NAT Traversal is Static NAT, you must enter the field NAT Public IP (Signaling/Media) appears.

Panel
borderStylenone
Caption
0Figure
1Static NAT - Outbound
3Static NAT - Outbound

Image Modified

 

Static NAT - Inbound 

Panel
borderStylenone
Caption
0Figure
1SIP Signaling Group - Inbound NAT Traversal

Image Modified

 

Field Definitions

Detection

...

Listen Ports - Field Definitions

Panel
borderStylenone
Caption
0Figure
1SIP Signaling Group - Listen Ports

Image Modified

 

This section defines a listening port and protocol for the SIP Signaling Group

...

Federated IP/FQDN - Field Definitions

Panel
borderStylenone
Caption
0Figure
1SIP Signaling Group - Federated IP/FQDN

Image Modified

 

The Federated IP/FQDN feature acts as an access control by defining from which server a SIP Signaling Group will accept messages. 

...

Inbound Message Manipulation - Field Definitions

Panel
borderStylenone
Caption
0Figure
1SIP Signaling Group - Inbound Message Manipulation

Image Modified

Panel
bgColor#FAFAFA
borderStylenone

The rules in this table are used to manipulate inbound SIP messages in the Signaling Group. The Signaling Group will support a maximum of 10 Message Rule Tools allowed in the Signaling Group (inbound direction).

Up. Moves the message table entry up in the list.The rules are applied in the order the tables are listed.

Down. Moves the message table entry down in the list.The rules are applied in the order the tables are listed.

Add. Displays a drop down list of available message tables. Select an entry and click Apply.

Remove. Removes the message table entry from the list.

 

Outbound Message Manipulation - Field Definitions

Panel
borderStylenone
Caption
0Figure
1SIP Signaling Group - Outbound Message Manipulation

Image Modified

 

 

Panel
bgColor#FAFAFA
borderStylenone

The rules in this table are used to manipulate outbound SIP messages in the Signaling Group. The Signaling Group will support a maximum of 10 Message Rule Tools allowed in the Signaling Group (outbound direction).

Up. Moves the message table entry up in the list. The rules are applied in the order the tables are listed.

Down. Moves the message table entry down in the list.The rules are applied in the order the tables are listed.

Add. Displays a drop down list of available Message Tables. Select an entry and click Apply.

Remove. Removes the message table entry from the list.