...
The following SIP Trunks are supported:
- Other ATT SIP TrunkATT
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Verizon Other SIP Trunk
- Softbank White Office
- Telstra Enterprise SIP Connect
- Verizon KDDI SIP Trunk
...
...
, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only. |
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
...
Scenario Parameters - Field Definitions
| Caption |
|---|
|
 Image Modified
|
Application
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP trunk used for connection to the Microsoft UC environment. Valid options are: Other ATT SIP Trunk, ATT KDDI SIP Trunk,Verizon NTT DOCOMO Officelink, Other SIP Trunk, KDDI SIP Trunk,SoftBank White Office, and NTT DOCOMO OfficelinkTelstra Enterprise SIP Connect, and Verizon SIP Trunk. The SIP Trunk selected determines the field options displayed in Step 2. See See Step 2 - Configure SIP Details for Endpoint. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the version of Microsoft UC. Valid options: Skype for Business, Lync 2010/2013 or Microsoft Cloud Connector Edition |
...
Enter the scenario configuration details based on the SIP Trunk selected in Configure SIP Trunk with Microsoft UC. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
...
ATT SIP Trunk - Field Definitions
These fields apply if you selected Generic ATT SIP Trunk in in Configure SIP Trunk with Microsoft UC.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Generic ATT SIP Trunk |
|---|
|
 Image Removed Image Added
|
Border Element Server
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Pool name of the Lync Server (FQDN). |
...
Enables/disables AT&T Forking Feature. Valid option: Yes or No. |
AT&T IP Toll Free
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
...
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
IP Toll Free Access Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. |
ATT SIP Trunk - Field Definitions
These fields apply if you selected ATT SIP Trunk in Configure SIP Trunk with Microsoft UC.
| Caption |
|---|
|
Image Removed |
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN or IP address of the Session Border Controller service provider. |
...
Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
Server Pool Host
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Pool name of the Lync Server (FQDN). |
Protocol (Server Pool)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol used to use for sending and receiving SIP messages between SBC and the Border Element Server Pool Host. Valid entry UDP : TLS or TCP. |
Port
...
Number (
...
Server Pool)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The SIP Server Port number Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Border Element Server Pool Host. |
Use Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables or disables the secondary Session Border Controller service provider configured. |
...
KDDI SIP Trunk - Field Definitions
These fields apply if you selected KDDI SIP Trunk in Configure SIP Trunk with Microsoft UC.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | KDDI SIP Trunk |
|---|
| 3 | KDDI SIP Trunk |
|---|
|
 Image Added
|
SIP Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
...
The FQDN or IP address of the Session Border Controller service provider. |
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Hardcoded to UDP. |
Port Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol SIP Server Port number used for communicating with the Secondary sending and receiving SIP messages between SBC and the Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port Number (Secondary Border Element Server)
Called Prefix
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
Used for setting up transformation rules for the FMC service. |
Address of Record URI
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Address of Record of the client that is registered on the SIP server. |
Static Host
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables AT&T Forking Feature. Valid option: Yes or No. |
...
Specifies the host portion of the FQDN used in the From Header. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
...
Specifies a user name to use in response to a challenge. |
Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
...
password for the Authentication ID. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Pool name of the Lync Server (FQDN). |
...
Re-enter the password for the Authentication ID. |
DNS Server IP
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
...
IP address (IPv4 or IPv6) of the DNS server. |
Domain Name
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. |
Verizon SIP Trunk - Field Definitions
These fields apply if you selected Verizon SIP Trunk in Configure SIP Trunk with Microsoft UC.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Verizon Managed Service |
|---|
|
 Image Removed
|
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN or IP address of the Session Border Controller service provider. |
Protocol (Border Element Server)
Domain name associated with the DNS IP address. |
Port Type
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the physical T1/E1 port used for this Signaling Group. Valid option: T1 or E1. |
DS1 Ports
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The physical T1/E1 port number to which the PSTN line is physically connected. DS1 entries are configured with the following command buttons: Up (move a DS1 port up in the list), Down (move a DS1 port down in the list), Add (adds a DS1 port), and Remove (deletes a DS1 port). For example, click Add. Select the desired PSTN port and OK. | Caption |
|---|
| 0 | Figure |
|---|
| 1 | Select ISDN Ports |
|---|
|  Image Added
|
|
Switch Variant
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP. |
...
Specifies the ISDN variant for the port type in the ISDN Signaling Group. For T1 - ATT 4EES
- ATT 5EES
- DMS 100
- N12
- Euro ISDN
- QSIG
- Japanese ISDN
For E1: |
ISDN Number Translation
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
...
Determines if the SBC should translate dialed PSTN digits as phone extensions. Valid options: Translation Extension (translates digits into phone extensions) or Passthrough Untranslated (does not translate digits). |
PBX Prefix
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Pool name of the Skype for Business / Lync Server (FQDN). |
...
numbers to prefix for the translated phone extension. This field is available only when ISDN Number Translation is set to Translation Extension. |
Extension Length
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Port Number (Server Pool)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. |
...
number of digits used to account for the PSTN extension. Valid options: 2, 3, 4, or 5.This field is available only when ISDN Number Translation is set to Translation Extension. |
NTT DOCOMO Officelink- Field Definitions
These fields apply if you selected KDDI SIP Trunk in NTT DOCOMO Officelink in Configure SIP Trunk with Microsoft UC.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | KDDI SIP NTT DOCOMO Officelink Trunk |
|---|
| 3 | KDDI SIP Trunk |
|---|
|
Image Removed |
SIP Server
 Image Added |
Office Link FOMA-R
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The FQDN or Host IP address of the Session Border Controller service providerSIP Server. |
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Hardcoded to UDP. The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP. |
Port Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element SIP Server. |
...
CUG Domain Name
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Used for setting up transformation rules for the FMC service. |
...
| The FQDN of the SIP Server. |
Server Pool Host
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Address of Record of the client that is registered on the SIP server. |
...
The Pool FQDN or IP Address of the Lync Server (FQDN). |
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the host portion of the FQDN used in the From Header. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies a user name to use in response to a challenge. |
...
The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Port number
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.
Other SIP Trunk - Field Definitions
These fields apply if you selected Other SIP Trunk in Configure SIP Trunk with Microsoft UC.
| Caption |
|---|
|
 Image Added
|
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The password for the Authentication ID. |
...
FQDN or IP address of the Session Border Controller service provider. |
Protocol (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Re-enter the password for the Authentication ID. |
...
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP. |
Port Number (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
IP address (IPv4 or IPv6) of the DNS server. |
...
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
Use Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Domain name associated with the DNS IP address. |
...
Enables or disables the secondary Session Border Controller service provider configured. |
Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the physical T1/E1 port used for this Signaling Group. Valid option: T1 or E1. |
DS1 Ports
Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol (Secondary Border Element Server)
| Panelpanel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The physical T1/E1 port number to which the PSTN line is physically connected. DS1 entries are configured with the following command buttons: Up (move a DS1 port up in the list), Down (move a DS1 port down in the list), Add (adds a DS1 port), and Remove (deletes a DS1 port). For example, click Add. Select the desired PSTN port and OK. | Caption |
|---|
| 0 | Figure |
|---|
| 1 | Select ISDN Ports |
|---|
| Image Removed |
|
...
Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port Number (Secondary Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
Server Pool Host
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Pool name of the Lync Server (FQDN). |
Protocol (Server Pool)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Port Number (Server Pool)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. |
SoftBank White Office - Field Definitions
These fields apply if you selected SoftBank White Office in Configure SIP Trunk with Microsoft UC.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | SoftBank White Office |
|---|
|
 Image Added
|
WAN Link
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only. |
Signaling/Media Source IP
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router. |
SIP Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The host IP address or FQDN for the SIP server. |
Gateway ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The ID used for authenticating with the router at the gateway of the network. |
Gateway Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The password used for authenticating with the router at the gateway of the network. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Re-entry of the password for the router serving as network gateway. |
Address of Record URI
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, enter GatewayID@SIPServer. |
Server Pool Host
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Pool FQDN or IP Address of the Lync Server (FQDN). |
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Port number
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.
Telstra Enterprise SIP Connect - Field Definitions
These fields apply if you selected Telstra Enterprise SIP Connect in Configure SIP Trunk with Microsoft UC.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Telstra Enterprise SIP Connect |
|---|
|
 Image Added
|
NAT Public Interface
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The public interface used for Network Address Translation (NAT). |
State
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN). |
Protocol and Port
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Hard coded as UDP and Port 5060. |
SIP Connect DNS IP
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IPv4 address used to create a Split DNS entry for the Telstra domain. |
SIP Connect Domain/Realm
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Connect Domain or Realm to which the specified IP address will map. |
Authentication User ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the ISDN variant for the port type in the ISDN Signaling Group. For T1 - ATT 4EES
- ATT 5EES
- DMS 100
- N12
- Euro ISDN
- QSIG
- Japanese ISDN
For E1: |
...
The User ID for use in authentication. |
Authentication Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The password to use when authenticating with the User ID. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The re-entered password for confirmation. |
Trunk Pilot Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Determines if the SBC should translate dialed PSTN digits as phone extensions. Valid options: Translation Extension (translates digits into phone extensions) or Passthrough Untranslated (does not translate digits). |
...
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service. |
Server Pool Host
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The numbers to prefix for the translated phone extension. This field is available only when ISDN Number Translation is set to Translation Extension. |
...
Pool FQDN or IP Address of the Lync Server (FQDN). |
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The number of digits used to account for the PSTN extension. Valid options: 2, 3, 4, or 5.This field is available only when ISDN Number Translation is set to Translation Extension. |
...
IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Port number
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.
Verizon SIP Trunk - Field Definitions
These fields apply if you selected NTT DOCOMO Officelink in Verizon SIP Trunk in Configure SIP Trunk with Microsoft UC.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | NTT DOCOMO Officelink Trunk |
|---|
|
Image Removed |
Office Link FOMA-R |
Image Added |
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Host FQDN or IP address of the SIP Server. |
...
Session Border Controller service provider. |
Protocol (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The IP protocol used to use for sending and receiving SIP messages between SBC and the SIP Border Element Server. Default This value : is fixed at UDP. |
Port Number
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The SIP Server Port number used for sending and receiving SIP messages between SBC and the SIP Server. Default value: 5062. |
...
(Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN of the SIP SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
Server Pool Host
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Pool FQDN or IP Address name of the Skype for Business / Lync Server (FQDN). |
Protocol (Server Pool)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol to use used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Port
...
Number (Server Pool)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. |
Default value: 5067.Step 3 - Confirm and Submit Configuration
...
This example displays a SIP ↔ Microsoft UC with a KDDI SIP Trunk.
| Caption |
|---|
|
 Image Modified
|