...
The following SIP Trunks are supported:
- ATT SIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Other SIP Trunk
- Verizon SIP Trunk
- SoftBank White Office
- Telstra Enterprise SIP Connect
- Verizon KDDI SIP Trunk
- Broadsoft TrunkSoftBank White Office
...
DOCOM Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only. |
Note |
---|
Broadsoft Trunk is applicable only if the user endpoint is an IP phone. |
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
...
Scenario - Field Definitions
Caption |
---|
|
Image Modified |
Application
...
Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
...
These fields apply if you selected Generic SIP Trunk in AT&T IP Flexible Reach in Step 1 - Select Scenario.
Section |
---|
Column |
---|
| Panel |
---|
| Caption |
---|
0 | Figure |
---|
1 | Generic SIP Trunk | AT&T IP Flexible Reach |
---|
| Image Added Image Removed |
|
|
|
Border Element Server
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol to use used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
Enables/disables AT&T Forking Feature. Valid option: Yes or No. |
AT&T IP Toll Free
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the number of users. Valid entry 1 - 1000. |
...
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
IP Toll Free Access Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
...
Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
...
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Define the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( ) icon. Enter the Network IP and Network Mask and click OK. |
Panel |
---|
|
Caption |
---|
| Image RemovedImage Added |
|
...
KDDI SIP Trunk -
...
Field Definitions
These fields apply if you selected AT&T IP Flexible Reach in KDDI SIP Trunk in Step 1 - Select Scenario.
Section |
---|
Column |
---|
| Panel |
---|
| Caption |
---|
0 | Figure |
---|
1 | AT&T IP Flexible Reach | KDDI SIP Trunk |
---|
3 | KDDI SIP Trunk |
---|
| Image AddedImage Removed |
|
|
|
...
SIP Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The The FQDN or IP address of the Session Border Controller service provider. |
Protocol
...
Panel |
---|
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP. |
Port Number
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
...
Called Prefix
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables or disables the secondary Session Border Controller service provider configured. |
...
Used for setting up transformation rules for the FMC service.
|
Address of Record URI
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol (Secondary Border Element Server)
Address of Record of the client that is registered on the SIP server.
|
Static Host
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
...
Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies a user name to use in response to a challenge.
|
Enter Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
password for the Authentication ID. |
Confirm Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables/disables AT&T Forking Feature. Valid option: Yes or No. |
...
Re-enter the password for the Authentication ID.
|
DNS Server IP
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
...
IP address (IPv4 or IPv6) of the DNS server. |
Domain Name
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled Domain name associated with the DNS IP address. |
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Define Define the number of users. Valid entry 1 - 1000. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
borderStyle | noneConfigure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Modified) icon. Enter the Network IP and Network Mask and click OK. |
---|
Panel |
---|
Caption |
---|
| Image RemovedImage Added |
|
...
NTT DOCOMO Officelink - Field Definitions
These fields apply if you selected Verizon Managed Service in NTT DOCOMO Officelink Trunk in Step 1 - Select Scenario.
...
...
Note |
---|
For an IP Phone as the user end point, Easy Configuration loads a generic template which follows the “National Numbering Plan” guidelines. |
...
Image Removed
...
NTT DOCOMO Officelink Trunk |
|
Image Added |
Office Link FOMA-R
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or Host IP address of the Session Border Controller service providerSIP Server. |
Protocol
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The The IP protocol used for sending and receiving SIP messages between SBC and the Border Element SIP Server. This Default value is fixed at : UDP. |
Port
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The The SIP Server Port number used for sending and receiving SIP messages between the SBC and the Border Element the SIP Server. Default value: 5062. |
CUG Domain Name
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN of the SIP Server. |
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Selects Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Define Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phone residesphones reside. - Network IP. IP address for the destination host or subnet in which the IP phone resides.
- Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( ) icon. Enter the Network IP and Network Mask and click OK. |
Panel |
---|
|
Caption |
---|
| Image RemovedImage Added |
|
...
Other SIP Trunk - Field Definitions
These fields apply if you selected KDDI Generic SIP Trunk in Step 1 - Select Scenario.
Section |
---|
Column |
---|
| Panel |
---|
| Caption |
---|
0 | Figure |
---|
1 | KDDI Other SIP Trunk |
---|
3 | KDDI SIP Trunk |
---|
| Image Removed |
|
|
|
...
Image Added |
|
|
|
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The The FQDN or IP address of the Session Border Controller service provider. |
Protocol (Border Element Server)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used to use for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP. |
Port Number (Border Element Server)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
...
Use Secondary Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Used for setting up transformation rules for the FMC service.
|
...
Enables or disables the secondary Session Border Controller service provider configured. |
Secondary Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Address of Record of the client that is registered on the SIP server.
|
...
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol (Secondary Border Element Server)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
...
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port Number (Secondary Border Element Server)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies a user name to use in response to a challenge.
|
...
The Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The password for the Authentication ID. |
...
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Re-enter the password for the Authentication ID.
|
DNS Server IP
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
IP address (IPv4 or IPv6) of the DNS server. |
...
Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Domain name associated The Protocol used for communicating with the DNS IP address. |
...
IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Selects The Port Number used for sending and receiving messages between SBC and the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
IP Phone Network Addresses
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Define the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK. Caption |
---|
| Image Added |
|
SoftBank White Office - Field Definitions
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | SoftBank White Office |
---|
|
Image Added |
WAN Link
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only. |
Signaling/Media Source IP
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router. |
SIP Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The host IP address or FQDN for the SIP server. |
Gateway ID
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The ID used for authenticating with the router at the gateway of the network. |
Gateway Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The password used for authenticating with the router at the gateway of the network. |
Confirm Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Re-entry of the password for the router serving as the network gateway. |
Address of Record URI
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, specify: GatewayID@SIPServer. |
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK. Caption |
---|
| Image Added |
|
Telstra Enterprise SIP Connect - Field Definitions
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | Telstra Enterprise SIP Connect Trunk |
---|
|
Image Added |
NAT Public Interface
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The public interface used for Network Address Translation (NAT). |
State
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN). |
Protocol and Port
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard coded as UDP and Port 5060. |
SIP Connect DNS IP
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IPv4 address used to create a Split DNS entry for the Telstra domain. |
SIP Connect Domain/Realm
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Connect Domain or Realm to which the specified IP address will map. |
Authentication User ID
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The User ID for use in authentication. |
Authentication Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The password to use when authenticating with the User ID. |
Confirm Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The re-entered password for confirmation. |
Trunk Pilot Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service. |
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phone residesphones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Modified) icon. Enter the Network IP and Network Mask and click OK. Caption |
---|
| Image RemovedImage Added |
|
pagebreak
...
Verizon SIP Trunk - Field Definitions
These fields apply if you selected Broadsoft Trunk Verizon Managed Service in Step 1 - Select Scenario.
Section |
---|
Column |
---|
| Panel |
---|
| Caption |
---|
| Image Removed |
|
|
|
...
| Image Added |
|
|
|
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller service provider. |
Protocol (Border Element Server)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN of the server domain. |
...
IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP. |
Port Number (Border Element Server)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type fieldThe SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Define the number of users. Valid entry 1 - 1000. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination Netmask for the host or subnet in which the IP phones phone resides. To create a network address, click the ( Image Removed) icon. Enter the Network IP and Network Mask and click OK. Caption |
---|
| Image Removed |
|
NTT DOCOMO Officelink - Field Definitions
These fields apply if you selected NTT DOCOMO Officelink Trunk in Step 1 - Select Scenario.
. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK. |
Panel |
---|
|
Note |
---|
For an IP Phone as the user end point, Easy Configuration loads a generic template which follows the “National Numbering Plan” guidelines. |
|
...
| Image Added |
|
Broadsoft Trunk - Field Definitions
These fields apply if you selected Broadsoft Trunk in Step 1 - Select Scenario.
Section |
---|
Column |
---|
| Panel |
---|
| Caption |
---|
| Image Added |
|
|
|
Server Domain
...
Image Removed
Office Link FOMA-R
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Host IP address of the SIP Server. |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP. |
Port
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between the SBC and the SIP Server. Default value: 5062. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN of the SIP Serverthe server domain. |
Enterprise Trunking
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field. |
IP Phone Numbering Plan
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines Define the number of users. Valid entry 1 - 1000. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones residephone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( ) icon. Enter the Network IP and Network Mask and click OK. Caption |
---|
| Image AddedImage Removed |
|
Step 3 - Confirm and Submit Configuration
...