Page History

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, go to SIP > Local Registrars
3. Click the Create SIP Local Registrar () icon.
4. Enter a name for the table entry.

5. Click OK.

Add a Local/Pass-through Authorization Table

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, go to SIP > Local/Passthru Auth Tables.
3. Click the Create Local/Pass-through Authorization Table () icon.
4. Enter a name for the table entry (i.e: Authorization Table).

5. Click OK.

...

Add an Entry to the Local/Pass-through Authorization Table

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, go to SIP > Local/Pass-thru Auth Tables.
3. Click the Authorization Table entry.
4. Click the Create Local/Pass-through Authorization Entry () icon.
5. Complete the Authorization Parameters fields as shown below.

6. Click OK.

...

Add a Call Routing Table

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, go to Call Routing Table.
3. Click the Create () icon.
4. Enter a desired name in the Description field.

5. Click OK.

Add and Configure a SIP Signaling Group

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, go to Signaling Groups.
3. Click Create Signaling Group and select SIP Signaling Group.

4. Configure the Signaling Group as shown below.

...

Endpoint Registration

Endpoint Configuration

...

1. Configure the endpoint with the user's credentials and Sonus SBC 1000/2000's IP address.

2. Click OKto register it with Sonus SBC 1000/2000 as shown below.

   Panel
   borderStyle none
   Caption 0 Figure 1 Configure Endpoint Image Modified

Registration Verification

...

Upon successful registration, the Sonus SBC 1000/2000 Registrar Table also displays the endpoint as a Registered User as shown below:

Image Removed

...