Page History

SBC SWe Lite Call Performance

...

REMOVE BELOW TABLE WHEN NEW DATA IS ENTERED

Maximum number of SIP ↔ SIP sessions

 

The table below includes the maximum call performance numbers for the listed call flow.

Note: To identify the required resource configuration for a given deployment of an SBC SWe Lite refer to Calculating DSP Requirements for SBC SWe Lite.

Caption
0 Table 1 SBC SWe Lite Performance Numbers
Description	Performance Value
100 Sessions (SIP signaling setup rate)	10 cps
	100
Maximum number of transcode sessions (media services mode). See Media Services.	25
Maximum number of RTP ↔ RTP media sessions (any combination of direct media, RTP proxy, or media services mode)	100
Call Setup – Maximum call setup rate	10 cps
Registrations – Maximum number of registered users	1,000
Encryption – Maximum number of RTP ↔ SRTP sessions (media services mode). See Media Services.	25

Local Proxy Calls
(RTP <-> SRTP)
(regardless of the presence of DSP calls)DSP Calls
(G.711 a/u law RTP/SRTP  G.729 A/B/AB RTP/SRTP)
(including in-band signaling) Transcode Sessions
(media services mode)

Number of vCPUs*	RAM	Registered Users	Pass Through Proxy Calls (RTP <-> RTP or SRTP <-> SRTP)	RAM	Number of Registrants	Total Number of Allowed Calls	Maximum Number of DSP Calls**	Max Call Setup Rate (CPS)	Max Number of	Max Number of SIP <-> SIP Session
1*	1 GBGiB	1,000	100	100	50	10 cps50	1,000
2	2 GBGiB	51,000	1,000	700	100	?	10 cps400	1,000
4	4 GBGiB	5,000	1,000700	300?	10 cps	400	1,000