Versions Compared

Old Version 16

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 17

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Note
  • Ensure the Node FQDN is definitive. Changing this information requires the CCE to be redeployed.
  • Ensure that an NTP server is configured.

Spacevars
0company
Sonus recommends starting with a clean and empty configuration.

...

  1. Prepare the CCE deployment on the SBC Edge using the section below.
  2. Using Sonus
    Spacevars
    0company
    Cloud Link Deployer via Remote Desktop on the ASM Module:
    1. Register all the CCE appliances.
    2. Install and publish the CCE Appliance Master.
    3. Install the CCE Appliance Slave.

...

StepAction
1Login to the WebUI of each SBC Edge.
2Navigate to Tasks  > Office 365 Cloud Connector Edition> Setup.
3Click the Cutomize CCE VMs tab.
4

In Domain Controller and Central Management Store VM > Windows Product Key 1, enter the first Microsoft Product Key. To identify the Product Key, see Identify Microsoft Product Key.

5In Under Mediation Server and Edge Server VM >  Windows Product Key 2, enter the second Microsoft Product Key.To identify the Product Key, see Identify Microsoft Product Key.
6From the Proxy Usage drop down list, select Enabled (enables the Proxy Server on the DMZ facing the internal network) If you select Disable, the Proxy Server is disabled.
7In the Proxy Server IP Address field, enter the server IP address for the Proxy Server in IPv4 format. This field is available only when Proxy Usage is set to Enabled.
8In the Proxy Server Port field, enter the port number for the Proxy Server. Valid entry: 1 - 65535. This field is available only when Proxy Usage is set to Enabled.
9Click Apply.
10Access Tasks> Operational Status to verify Windows Activation.
11

To complete the deployment, continue with installing the Installing the CCE Appliance using Sonus Ribbon Cloud Link Deployer.

 

 

Caption
0Figure
1Activate the CCE

 

...

Info

See Managing Cloud Connector Edition Private Certificates for the following setup options:

  • Synchronize the CCE and SBC CA Certificate
  • Renew the CCE CA or CCE Certificate

 

Anchor

...

Installing the CCE

...

Appliance using Ribbon Cloud Link Deployer
Installing the CCE Appliance using Ribbon Cloud Link Deployer

...

Installing the CCE Appliance using

...

Ribbon Cloud Link Deployer

 

Note
titleCCE Deployment - What to Expect
  • The CCE deployment may exceed two hours.
  • The CCE deployment status is visible only on the Remote Desktop to the ASM. The WebUI indicates that the CCE is running while the deployment process is in progress.
  • While the CCE deployment is running, you should not perform any actions on the ASM via the WebUI (i.e., Shut Down/Reset/Reboot/Reinitialize/Install etc.).
  • If the Office 365 PSTN Site already exists in your tenant, ensure the other Appliance is removed, and the CCE Auto-Update time window is properly configured. If you are in a time window dedicated to the Auto-Update, see Managing Update Schedule and Creating and Modifying PSTN Hybrid Site to configure the PSTN Hybrid Site and configure Auto-Update to false. Replication of the information may take up to 30 minutes.

Using Sonus

Spacevars
0company
Cloud Link Deployer via Remote Desktop on the ASM Module:

...

Step

Action

1

Remote desktop to the ASM of the SBC Edge System 1.

2

Launch the

Spacevars
0company
Sonus Cloud Link Deployer from icon on the desktop.

3

Check the first two actions:

  • Transfer Password from SBC: This step imports the password that has been set during the Preparing the CCE.
  • Register Appliance: This step registers this new appliance on your Ofiice365 tenant.
4Click Apply.
5

After successful execution, remote desktop to the ASM of the

Spacevars
0product
System 2.

6

Launch the

Spacevars
0company
Sonus Cloud Link Deployer from icon on the desktop.

7

Check the first two action.

  • Transfer Password from SBC: This step imports the password that has been set during the Preparing the CCE.
  • Register Appliance: This step registers this new appliance on your Ofiice365 tenant.
8Click Apply.

...

Step

Action

1

Remote desktop to the ASM of the SBC Edge System 1.

2Launch the
Spacevars
0company
Sonus Cloud Link Deployer from icon on the desktop.
3

Check the last two actions:

  • Install Appliance: This step deploys the CCE.
  • Publish Appliance (HA Only): This will extract the required information from the HA Master.
4Click Apply.

...

StepAction
1

Remote desktop to the ASM of the SBC Edge System 2.

2Launch the
Spacevars
0company
Sonus Cloud Link Deployer from icon on the desktop.
3

Check the third action:

  • Install Appliance: This step deploys the CCE.
4Click Apply. The Installation time depends on the bandwidth between the Master and the Slave.
5After configuring the SBC Edge for CCE, refer to Managing Your Office 365 Tenant to configure CCE update time and user.

...

 

Caption
0Figure
1Building your SBC Edge-2 Configuration

 

Multiexcerpt include
MultiExcerptNameBasicCallVerification
PageWithExcerptConfiguring the SBC Edge for a Single CCE

Multiexcerpt include
MultiExcerptNameO365KnownIssues
PageWithExcerptConfiguring the SBC Edge for a Single CCE

Updating the CCE Password

Follow these steps if you need to update the O365 tenant admin password or account.

StepAction
1On the WebUI, click Tasks and select the Prepare CCE tab (see Preparing the CCE).
2Click Prepare CCE.
3From the Password Setting drop down list, select Change Password. Keep the same passwords for the Edge Server, CCE Service and CA Backup File, but change the passwords for Tenant Account User and Tenant Account Password.
4

On Remote desktop, start the

Spacevars
0company
Sonus Cloud Link Deployer, and check Transfer Password from SBC to reset the credentials.