Page History

After installing the Sonus SBC 1000/2000 for the first time or resetting the Sonus SBC 1000/2000 to factory defaults, run the Initial Setup to configure the

When a system is in Factory Default mode, the DHCP client is enabled on Ethernet 1 and the DHCP server is enabled on Ethernet 2. This allows you to connect to the Sonus SBC without having to assign your computer a static IP.

...

1. Assemble the following equipment:
   • Laptop or other portable computer running a compatible web browser equipped with an Ethernet port.
   • Ethernet patch cord with standard straight-through wiring or crossover wiring.
   • Optional: DHCP server and DNS server (with dynamic DNS enabled). Dynamic DNS is required for initial configuration only if you want to access the system via its serial number/hostname.
2. Verify that the

   Spacevars
   0 longproduct

    system power cable is plugged in and the system is running.

Connect the

...

SBC 1000/2000

For SBC 1000/2000 - Connect through Ethernet 1

...

1. Directly connect the Ethernet Cable to the Admin Port on the SBC. To see where the Admin port is located, see SBC 2000 Front Panel.
2. Assign a temporary static IP address of 192.168.128.8  to the PC.
   • Configuring a Static IP on Windows
   • Configuring a Static IP on a Mac
3. Connect to the Sonus SBC 2000 at 192.168.128.2.
4. Continue with Initial Setup. See Proceed with the Initial Setup.

...

Follow the instructions for your Sonus SBC 1000/2000 model:

...

...