Page History

...

Overview

Time of Day enables the SBC to select a route for a call based on the local time and date; this option allows each specific route to optionally be selected based on the current local system time.

...

This Best Practice details how to configure Time of Day Routing. For details on field configuration and usage, refer to Managing Time of Day Tables.

Step 1: Create a Time of Day Table

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, click on Time of Day Table.

3. Click the Add ( ) icon at the top of the Time of Day Tables page.

4. Enter a table description.

5. Click OK.

   Panel
   Caption 0 Figure 1 Create Time of Day Table - Example

   Panel
   Caption 0 Figure 1 Time of Day Table - Example

Step 2: Create an entry to a Time of Day Table

Create a Time of Day table to include a Time of Day restriction.

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, click on the desired Time of Day Table.

3. Click the Create Time of Day Entry ( ) icon.

4. Configure the fields as shown below. For field descriptions, refer to Time of Day Entry - Field Definitions.

   Info
   If the Start Time and Stop Time are the same, or if the Start Time and Stop Time are both empty, the Time of Day entry applies all day. If the Start Time is greater than the Stop Time, the Time of Day entry applies from the Start Time until the Stop Time on the next day. A blank entry entry specifies all days or hours.

5. Click OK.

   Panel
   borderStyle none
   Caption 0 Figure 1 Create Time of Day Entry - Example

Step 3: Map the Time of Day Entry to a Call Routing Table

Create a Routing Table entry that maps to the Time of Day routing. The Call Route will route incoming calls based on the Time of Day entry.

...