Page History

Usage of the Easy Configuration wizard to configure the

These instructions assume the SBC Easy Configuration wizard is running. See Using the Easy Configuration Wizard.

The scenario in which the configuration template is provided. In this case, select ISDN PSTN ↔ Microsoft Teams.

Enter the name to describe ISDN PSTN ↔ Microsoft Teams setup.

The country in which the ISDN PSTN ↔ Microsoft Teams setup originates.

The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.

Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.

Options:  ELIN Identifier, E911/E112 or None.

Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.

Sets Provider Type to ISDN.

Defines the version of Microsoft Teams. Valid options: Skype for Business, Lync 2010/2013 or Microsoft Cloud Connector Edition

Specifies the physical T1/E1 port used for this Signaling Group. Valid option: T1 or E1.

The physical port number to which the PSTN line is physically connected. Port entries are configured with the following command buttons: Up (move a port up in the list), Down (move a port down in the list), Add (adds aport), and Remove (deletes a port).

For example, click Add. Click the check boxes for ports, and then click OK.

Specifies the ISDN variant for the port type in the ISDN Signaling Group.

For T1

• ATT 4EES
• ATT 5EES
• DMS 100
• N12
• Euro ISDN
• QSIG
• Japanese ISDN

For E1:

• Euro ISDN
• QSIG

Determines if the SBC should translate dialed PSTN digits as phone extensions. Valid options: Translation Extension (translates digits into phone extensions) or Passthrough Untranslated (does not translate digits).

The numbers to prefix for the translated phone extension. This field is available only when ISDN Number Translation is set to Translation Extension.

The number of digits used to account for the PSTN extension. Valid options: 2, 3, 4, or 5.This field is available only when ISDN Number Translation is set to Translation Extension.

The Pool name of the Skype for Business/Lync Server (FQDN).

The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

The Port Number used for sending and receiving SIP messages between SBC and the Server Pool Host.