Page History
...
| Add_workflow_for_techpubs | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Tip | ||||
|---|---|---|---|---|
Usage of the Easy Config wizard to configure the
|
...
The SBC Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy SBC in an Enterprise's Lync environment with a SIP Trunk Provider to an IP phone. The SBC can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.
The following SIP Trunks are supported:
- ATT &T IP Flexible ReachSIP Trunk
- Other Generic SIP Trunk
- Verizon Managed ServiceSIP Trunk
- KDDI SIP Trunk
- Broadsoft Trunk
- SoftBank White Office
- NTT DOCOMO Officelink
| Note |
|---|
Broadsoft Trunk is applicable only if the user endpoint is an IP phone. |
...
Scenario - Field Definitions
...
| width | 600px |
|---|
...
| Caption | ||||
|---|---|---|---|---|
| ||||
|
...
Application
| Panel | ||||
|---|---|---|---|---|
| ||||
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The SIP trunk used for connection to the IP phones. Valid options: Generic ATT SIP Trunk, AT&T IP Flexible Reach Other SIP Trunk, Verizon Managed ServiceSIP Trunk, KDDI SIP Trunk and, Broadsoft Trunk, SoftBank White Office, and NTT DOCOMO Officelink. The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint. |
...
Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
...
Other SIP Trunk - Field Definitions
These fields apply if you selected Generic SIP Trunk in Step 1 - Select Scenario.
...
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the (
|
...
ATT SIP Trunk - Field Definitions
These fields apply if you selected AT&T IP Flexible Reach in Step 1 - Select Scenario.
...
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
|
| Pagebreak |
|---|
Verizon
...
SIP Trunk - Field Definitions
These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.
...
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the (
|
| Pagebreak |
|---|
NTT DOCOMO Officelink - Field Definitions
These fields apply if you selected NTT DOCOMO Officelink Trunk in Step 1 - Select Scenario.
| Note |
|---|
For an IP Phone as the user end point, Easy Configuration loads a generic template which follows the “National Numbering Plan” guidelines. |
| Caption | ||||
|---|---|---|---|---|
| ||||
|
Office Link FOMA-R
| Panel | ||||
|---|---|---|---|---|
| ||||
| The Host IP address of the SIP Server. |
Protocol
| Panel | ||||
|---|---|---|---|---|
| ||||
| The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP. |
Port
| Panel | ||||
|---|---|---|---|---|
| ||||
| The SIP Server Port number used for sending and receiving SIP messages between the SBC and the SIP Server. Default value: 5062. |
CUG Domain Name
| Panel | ||||
|---|---|---|---|---|
| ||||
| The FQDN of the SIP Server. |
IP Phone Numbering Plan
| Panel | ||||
|---|---|---|---|---|
| ||||
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel | ||||
|---|---|---|---|---|
| ||||
| Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel | ||||
|---|---|---|---|---|
| ||||
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number
| Panel | ||||
|---|---|---|---|---|
| ||||
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
Configure a network address and Netmask for the host or subnet in in which the IP phones reside.
To create a network address, click the (
|
Step 3 - Confirm and Submit Configuration
...
Overview
Content Tools