Page History
...
| Caption | ||||
|---|---|---|---|---|
| ||||
|
| Caption | ||||
|---|---|---|---|---|
| ||||
|
Generating the CSR
...
| Step | Action |
|---|---|
| 1 | Login to the WebUI of one of the SBC Edge. |
| 2 | Navigate to Tasks > Setup Cloud Connector Edition > Generate CSR. |
| 3 | Generate the CSR as shown below with following information. Note: This example uses aepsite1.sonusms01.com and sip.sonusms01.com as common name and SAN To ensure creating a valid CSR for Cloud Connector Edition usage, please see the section "Certificate requirements" on https://technet.microsoft.com/en-us/library/mt605227.aspx .
|
| Caption | ||||
|---|---|---|---|---|
| ||||
|
Importing Certificate/Keys
...
| Step | Action |
|---|---|
| 1 | Login to the WebUI of both SBC Edge systems. |
| 2 | Open the Tasks tab and click Setup Cloud Connector Edition in the navigation pane. |
| 3 | Click the Prepare CCE tab. |
| 4 | Click the Prepare CCE button. Enter the requested password. A confirmation will request you to enter the password again. The same password should be used on all Appliances in the site. Click OK as shown below. |
| 5 | To complete the deployment, continue with Manually Configuring the CCE on the ASM Activating the CCE. |
| Anchor | ||||
|---|---|---|---|---|
|
This step stores the Microsoft product keys, and activates the CCE VM (which is not yet activated).
| Note | ||||
|---|---|---|---|---|
Perform these steps on both
|
| Info |
|---|
Each CCE requires four VMs; each Microsoft Product Key activates two VMs. |
| Step | Action |
|---|---|
| 1 | Login to the WebUI of each SBC Edge. |
| 2 | Open the Tasks tab and click Setup Cloud Connector Edition in the navigation pane. |
| 3 | Click the Activate CCE tab. |
| 4 | In Domain Controller and Central Management Store VM > Windows Product Key 1, enter the first Microsoft Product Key. To identify the Product Key, see Identify Microsoft Product Key. |
| 5 | In Under Mediation Server and Edge Server VM > Windows Product Key 2, enter the second Microsoft Product Key. To identify the Product Key, see Identify Microsoft Product Key. |
| 6 | Click Activate. |
| 7 | Access Tasks> Operational Status to verify Windows Activation. If activation fails, see Troubleshooting. |
| 8 | To complete the deployment, continue with installing the Installing the CCE Appliance using Sonus Cloud Link Deployer. |
| Caption | ||||
|---|---|---|---|---|
| ||||
|
| Info | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
| Info | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
| Anchor | ||||
|---|---|---|---|---|
|
...
Overview
Content Tools