Page History

...

1. Log on to the Host IP as root user.

2. To know the maximum number of virtual functions a physical function can support, execute below command:

   Code Block
   cat /sys/class/net/eth3/device/sriov_totalvfs

3. On a host machine (compute node), create the required number of virtual functions via the PCI SYS interface. Execute below command:
   In this example, we create 8 virtual functions. The total number of virtual functions is based on the requirements.

   Code Block
   echo "echo '8' > /sys/class/net/eth3/device/sriov_numvfs" >> /etc/rc.local

4. Reboot the system.

5. To verify devices exist and to attach VM:

   1. To list the newly added Virtual functions attached to the network device, execute below command:
      Example: Intel I350

      Code Block

      lspci | grep I350 01:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 01:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 01:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 01:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 01:00.4 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 01:00.5 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 01:00.6 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 01:00.7 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 01:10.0 Ethernet controller: Intel Corporation I350 Ethernet Controller Virtual Function (rev 01) 01:10.1 Ethernet controller: Intel Corporation I350 Ethernet Controller Virtual Function (rev 01) 01:10.2 Ethernet controller: Intel Corporation I350 Ethernet Controller Virtual Function (rev 01) 01:10.3 Ethernet controller: Intel Corporation I350 Ethernet Controller Virtual Function (rev 01) 01:10.4 Ethernet controller: Intel Corporation I350 Ethernet Controller Virtual Function (rev 01) 01:10.5 Ethernet controller: Intel Corporation I350 Ethernet Controller Virtual Function (rev 01) 01:10.6 Ethernet controller: Intel Corporation I350 Ethernet Controller Virtual Function (rev 01) 01:10.7 Ethernet controller: Intel Corporation I350 Ethernet Controller Virtual Function (rev 01)

   2. To filter the Intel I350 network device from the list of available host devices use 01, execute below command:

      Code Block
      virsh nodedev-list | grep 01 pci_0000_01_00_0 pci_0000_01_00_1 pci_0000_01_00_2 pci_0000_01_00_3 pci_0000_01_00_4 pci_0000_01_00_5 pci_0000_01_00_6 pci_0000_01_00_7 pci_0000_01_10_0 pci_0000_01_10_1 pci_0000_01_10_2 pci_0000_01_10_3 pci_0000_01_10_4 pci_0000_01_10_5 pci_0000_01_10_6 pci_0000_01_10_7

6. To get device details:
   
   

   Info
   Follow step 6 and 7 for other packet interface as well.

    

   1. The pci_0000_01_00_0 is one of the Physical Functions and pci_0000_01_10_0 is the first corresponding Virtual Function for that Physical Function.

   2. To get advanced output for both devices, execute below command:

       

      Code Block

      virsh nodedev-dumpxml pci_0000_01_10_0 <device> <name>pci_0000_01_10_0</name> <path>/sys/devices/pci0000:00/0000:00:03.0/0000:01:10.0</path> <parent>pci_0000_00_03_0</parent> <driver> <name>igbvf</name> </driver> <capability type='pci'> <domain>0</domain> <bus>1</bus> <slot>16</slot> <function>0</function> <product id='0x1520'>I350 Ethernet Controller Virtual Function</product> <vendor id='0x8086'>Intel Corporation</vendor> <capability type='phys_function'> <address domain='0x0000' bus='0x01' slot='0x00' function='0x2'/> </capability> <iommuGroup number='94'> <address domain='0x0000' bus='0x01' slot='0x10' function='0x2'/> </iommuGroup> <numa node='0'/> <pci-express> <link validity='cap' port='0' speed='5' width='4'/> <link validity='sta' width='0'/> </pci-express> </capability> </device>

       

      This example adds the Virtual Function pci_0000_01_10_0 to the virtual machine. Note the bus, slot and function parameters of the Virtual Function is required for adding the device. For example, copy these parameters into a temporary XML file, such as /tmp/new-interface.xml.

      Code Block
      <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='1' slot='16' function='0'/> </source> </interface>

   3. Before going to add the Virtual Functions to the virtual machine, we must detach those virtual functions from Host machine.

      Code Block
      virsh nodedev-detach pci_0000_01_10_0

7. Before you proceed with the below step, create virtual machine. Refer to Creating a New SBC SWe Instance on KVM Hypervisor.

8. To add the Virtual Function to the virtual machine, execute below command. This attaches the new device immediately and saves it for subsequent guest restarts.

   Info
   The MyGuest indicates the Virtual Machine name.

   Code Block
   virsh attach-device [MyGuest] /tmp/new-interface.xml --config

   Info
   Using the --config option ensures the new device is available after future guest restarts.

pagebreak