...
The example below shows the connection topology, which includes the following:
Caption | ||||
---|---|---|---|---|
| ||||
...
Info | ||
---|---|---|
| ||
A Tenant is used within the Microsoft environment to describe an Office 365 organization; through this tenant, administrators can manage projects, users, and roles. |
...
Consult the Microsoft documentation for the Direct Routing interface configuration guidelines, including the RFC standards and the syntax of SIP messages.
...
The SBC FQDN must be from one of the Domain names registered in “Domains” of the Tenant. The table below lists Domain Name examples.
Note |
---|
You cannot Do not use the *.onmicrosoft.com tenant for the domain name. |
...
Info |
---|
Users may be from any SIP domain registered for the tenant. For example, you can configure user user@SonusMS01.com with the SBC FQDN name sbc1.hybridvoice.org, as long as both names are registered for this the tenant. |
Caption | ||||
---|---|---|---|---|
| ||||
...
Request a certificate for the SBC External interface and configure it based on the example using GlobalSign as follows:
Info |
---|
The certificate is obtained through the Certificate Signing Request (instructions below). The Trusted Root and Intermediary Signing Certificates are obtained from your certification authority. |
...
Click Generate SBC Edge CSR.
Info |
---|
Many of CA's do not support a private key with size a length of 1024 bits. Validate with your CA requirements and select the appropriate length of the key. |
Enter data in the required fields.
Click OK. Once After the Certificate Signing request finishes generating, copy the result to the clipboard.
Caption | ||||
---|---|---|---|---|
| ||||
...
After receiving the certificates from the certification authority, install the SBC Certificate and Root/Intermediate Certificates as follows:
...
In the left navigation page, access System > Node-Level Settings.
Configure the NTP and DNS Server with the appropriate configuration.
Caption | ||||
---|---|---|---|---|
| ||||
...
SIP server tables defines the information about for the SIP interfaces connected to the Ribbon SBC. It should ; it must be configured to support the Microsoft Phone System.
...
Configure Routing Logic using per Ribbon Documentation. Refer to Working with Telephony Routing.
Caption | ||||
---|---|---|---|---|
| ||||
...
Click the ( of left corner and to add a new Transformation Table.
) icon at the topCaption | ||||
---|---|---|---|---|
| ||||
|
Configure the parameters as shown below.
Caption | ||||||
---|---|---|---|---|---|---|
| ||||||
|
...
From the Create Signaling Group drop down box, select SIP Signaling Group.
Configure the parameters as shown below. Leave the default values for all other parameters as default.
Click OK.
Caption | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||
[1] Please ignore if the SBC have has a Public IP assign assigned on his the interface. Only required if The NAT Public IP is required only when the SBC is behind a NAT. |
Caption | ||||
---|---|---|---|---|
| ||||
...