...
Add_workflow_for_techpubs | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
Panel | ||||
---|---|---|---|---|
In this section...
|
Note |
---|
SBC Edge will support now supports a new deployment with CCE 2.1.0 in release 7.0.1. If Before this release, if your CCE auto-updates to CCE 2.1.0:
|
...
Step | Action | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Login to the WebUI of the SBC Edge. | ||||||||||||||||
2 | Navigate to Tasks > Office 365 Cloud Connector Edition> Setup. | ||||||||||||||||
3 | Click the Configure CCE tab. | ||||||||||||||||
4 | Configure all necessary information and then click OK.
Note: Enterthe ASM's IP address in the HA Master IP Address field. The Slave uses the same root certification as the Master, and this location contains the shared folder that contains the Root CA of the Master. | ||||||||||||||||
5 | After receiving the activity status as successfully completed, click the Prepare CCE tab to continue. | To increase Fast Failover (which shortens the time where certain ported numbers have a long delay from ITSP PSTN provider) configure Trunk Information: Refer Support. Indicates whether Gateways support Refer for a Call Transfer scenario. Valid entries: Enable (the Gateway(s) supports Refer which can handle call transfer) or Disable (the Gateway does not support Refer and the Mediation Server handles call transfer). Fast Failover Timer. Determines whether outbound calls that are not answered by the gateway within ten seconds will be routed to the next available trunk; if there are no additional trunks, the call will automatically be dropped. Valid entries: Enable or Disable. Forward Call History. Indicates whether call history information is forwarded through the trunk. Valid entries: Enable or Disable. Forward PAI. Indicates whether the P-Asserted-Identity (PAI) header will be forwarded along with the call. Valid entries: Enable or Disable. | |||||||||||||||
6 | After receiving the activity status as successfully completed, click the Prepare CCE tab to continue. |
Warning |
---|
Warning |
...
Caption | ||||
---|---|---|---|---|
| ||||
Multiexcerpt include | ||||
---|---|---|---|---|
|
Multiexcerpt include | ||||
---|---|---|---|---|
|
Follow these steps if you need to update the O365 tenant admin password or account.
Step | Action |
---|---|
1 | On the WebUI, run Preparing the CCE to specify a new Password. Select the existing password and enter the new password. Only the O365 should be modified for a running instance of CCE. |
1 | On the WebUI, click Tasks and select the Prepare CCE tab (see Preparing the CCE). |
2 | Click Prepare CCE. |
3 | From the Password Setting drop down list, select Change Password. Keep the same passwords for the Edge Server, CCE Service and CA Backup File, but change the passwords for Tenant Account User and Tenant Account Password. |
42 | On Remote desktop, start the Sonus Cloud Link Deployer, and check Transfer Password from SBC to reset the credentials. |