Versions Compared

Old Version 4

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Perform the following steps to save the existing 

Spacevars
0product
configuration. The backup file created by this procedure is used to restore the system configuration if reinstallation of the software is needed for any reason.

To reload the

Spacevars
0product
 configuration, refer to Restoring the SBC Configuration for guidance.
Multiexcerpt
MultiExcerptNameSBC SWe Cloud restore limitation
Info
titleNote

Restoring the

Spacevars
0product
configuration on a
Spacevars
0product3
platform is not supported. Instead, load the saved configuration to a new
Spacevars
0product3
instance.

 

  1. Log on to

    Spacevars
    0product
     CLILog on to SBC CLI. Execute the following command to save the SBC configuration
    Spacevars
    0product
     configuration.

    Code Block
    languagenone
    titleExample:
    admin@SBC01a> request system admin SBC01 saveConfig 
This command will save the current configuration. Do you want to continue (yes/no) yes
Proceeding
result success
reason Configuration Saved as /var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz
    note
    Info
    titleNote

    This command saves the current configuration to a time-stamped zipped tar file located in /var/log/sonus/sbx/config directory of SBC active server. 

  2. Use SFTP (default login/password is sftpadmin/sftpadmin) to copy the configuration file from the active server to the remote server. Following is an example to transfer the saved configuration file to a remote linux server.

    Code Block
    languagenone
    titleExample:
    # sftp -oPort=2024 sftpadmin@SBC01a:/var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz /home/bob/SBC01/config
sftpadmin@SBC01a's password: <sftpadmin>
Connected to SBC01a.
Fetching /var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz to /home/bob/SBC01/config
    Note
    The backup file created by this procedure is used to restore the system configuration if re-installation of the software is needed for any reason. To reload the configuration, see Restoring the SBC Configuration for guidance.
 Pagebreak