This section lists SIP Common IP Attributes Flags details grouped alphabetically.
| Tip |
|---|
Click a letter to go to the section listing all flags beginning with that letter. |
| Include Page |
|---|
| Transparency_Profile_Note |
|---|
| Transparency_Profile_Note |
|---|
|
a
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {a} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
acceptAlertInfo <disable | enable>
addPChargingFuncAddr <disable | enable>
addPathServiceRoute <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
acceptAlertInfo | Enable flag for the to process the URI specified in the Alert-info header received in the 180 ringing message and use the tone specified in the Alert-Info header as the Local Ring Back Tone to play.NOTE: When this flag is enabled, the tones processed override any incoming tones in the media stream. For example, when Accept Alert-Info is enabled, the plays the tone specified in the Alert-info header of 180 ringing message overriding the inband tones included in the 180 ringing message.NOTE: When using PSX in your network, enable the acceptAlertInfo flag from PSX's IP Signaling Profile. \ | addPChargingFuncAddr | Set (enable) this flag to add the stored value of the PCFA header to a request or response.The PCFA header value is stored based on the flag. | addPathServiceRoute | Enable this flag to allow acting as P-CSCF or IBCF to add two Path headers in REGISTER request towards the Core (createPathHeader must be enabled) OR allow acting as IBCF to add two Service-Route headers in 200 OK response for REGISTER towards the P-CSCF (createServiceRouteHeadermust be enabled).NOTE: When noServiceRouteHdrForEmergencyRegistration flag is enabled, does not add Service-Route headers for emergency registrations even if addPathServiceRoute and createServiceRouteHeader flags are enabled. |
|
c
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {c} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
callHoldInterworking <disable | enable>
clearmodeForDataCalls <disable | enable>
contactTransparencyForIsFocusMediaTag <disable | enable>
createPChargingVector <disable | enable>
createPVisitedNetworkId <disable | enable>
createPathHeader <disable | enable>
createServiceRouteHeader <disable | enable>
customizedSessionTimerBehavior <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
callHoldInterworking | Set flag to enable Call Hold Interworking service between ISUP and SIP. The service converts an ISUP call hold to an SIP call hold, or vice-versa. Call holds are invoked by ISUP or SIP/H.323 endpoints. When disabled, call hold indications are dropped. | clearmodeForDataCalls | Set flag to enable the clearmode function for data calls.disable – (default) If disabled for the SIP Egress call leg, legacy operation is signaled and payload type is assumed implicit (same on both sides). If disabled for the SIP Ingress call leg, legacy G.711 operation is accepted as well as Clearmode.enable – If enabled for the SIP Egress call leg, Clearmode is sent using dynamic payload type. If enabled for SIP Ingress call leg, only Clearmode data calls are accepted.
| contactTransparencyForIsFocusMediaTag | Enable flag to transparently pass Contact header for all requests and responses in outgoing message when "isFocus" parameter is received in Contact header. NOTE: This flag is configurable from an external PSX. | createPChargingVector | Enable flag to create a new PCharging-Vector header in outgoing message for INVITE and REGISTER messages. The PCharging-Vector header is also supported in SUBSCRIBE, OPTIONS, NOTIFY, MESSAGE, PUBLISH and REFER messages when received from same direction as REGISTER message. The P-Charging-Vector header contains the ICID value, ICID Generated at value and orig-ioi value. The string for orig-ioi value can be configured at egress trunk group. | createPVisitedNetworkId | Enable flag to allow acting as P-CSCF to insert a P-Visited-Network-ID Header in the egress REGISTER request with the P-Visited-Network-ID configured string. | createPathHeader | Enable flag to create a new Path header in the outgoing REGISTER request. | createServiceRouteHeader | Enable flag to create a new Service-Route header in the outgoing 200 OK response for REGISTER. NOTE: When noServiceRouteHdrForEmergencyRegistration flag is enabled, does not add Service-Route headers for emergency registrations even if addPathServiceRoute and createServiceRouteHeader flags are enabled. | customizedSessionTimerBehavior | When enabled, the remote peer expects customer-specific session timer behavior. When disabled, the remote peer expects the standard session timer behavior. |
|
d
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {d} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
disableAlsoHeader <disable | enable>
disableHostTranslation <disable | enable>
disableMediaLockDown <disable | enable>
disableReferToUriParameters <disable | enable>
discardReceivedReasonHeader <disable | enable>
doNotIncludeSsAttributeInReInvite <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
disableAlsoHeader | Enable this flag to allow to ignore the Also header if received from the remote peer and does not send the Also header to the remote peer. When disabled, the uses the Also header for call forwarding as usual. | disableHostTranslation | Use this flag to enable/disable host name translation. This applies to all URL style headers that require transparency and defines the processing that SBC is to apply to the host name portion of these headers before forwarding. | disableMediaLockDown | Enable this flag to allow to disable media lock-down by not sending SIP Re-INVITE/UPDATE messages in the following scenarios:- Multiple codecs are sent in the offer and multiple codecs (or their subsets) are received in the answer, and the call becomes transcoded.
- Multiple codecs are sent in the offer and a single codec is received in the response.
- Multiple codecs are sent in the offer and a single codec with codec attributes is received in the response.
If the result is a pass-through codec, and the most preferred codec in the answer (first codec in the list) is same as the selected codec, the disables media lock-down by not informing the egress peer using a re-INVITE.If the offers both pass-through and transcoding codecs, the minimizeRelayingOfMediaChangesFromOtherCallLegAll flag effectively suppresses the re-INVITEs to peers when the peer answers with a single codec. However, if the peer has multiple codecs, the minimizeRelayingOfMediaChangesFromOtherCallLegAll flag in certain situations cannot suppress the re-INVITEs as a change in one of the common codecs is detected. In these situations, if the ’s most preferred codec matches the peer's most preferred codec, enable the disableMediaLockDown flag to suppress this Modify Offer initiated by the to lock down the codec.If this flag is disabled, the sends a modify offer to lock down the codec. | disableReferToUriParameters | By default, this flag is disabled thereby allowing parameters in the SIP URI Refer-To header to pass through to the outgoing INVITE URI. Enable this flag to prevent the parameters from passing through. | discardReceivedReasonHeader | Enable flag to ignore cause code in received Reason header. When disabled, the uses the cause code in the received Reason header. | doNotIncludeSsAttributeInReInvite | Enable flag to prevent from sending silence suppression (no a=silenceSupp is sent) in the SDP to the remote peer. When disabled, and when silence suppression is off, the sends a=silenceSupp:off in the SDP to the remote peer. NOTE: a=silenceSupp:on is never sent to remote peer in current implementation when silence suppression is on. |
|
e
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {e} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
enableDefaultPUIProcedures <disable | enable>
enableDialStringHandling <disable | enable>
endToEndBye <disable | enable>
endToEndPrack <disable | enable>
endToEndReInvite <disable | enable>
endToEndUpdate <disable | enable> |
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
enableDefaultPUIProcedures | Enable this flag to allow default PUI procedures on egress trunk group. Note that the Privacy 'Transparency' flag must be disabled to allow this feature. | enableDialStringHandling | This flag is primarily used to enable/disable transparency of dial string (i.e username) received in request URI of INVITE message. Transparency does not occur, however, if PSX/ERE returns globalized or non-private called address. SBC performs dial string identification based on RFC 4967.
| endToEndBye | For SIP-to-SIP calls, enable flag to prevent from issuing the 200 BYE on the side initiating the disconnect until the 200 BYE is received from the other leg. When disabled, the issues the 200 BYE on the side initiating the disconnect regardless of whether a 200 BYE is received from the other leg. | endToEndPrack
| When this flag is enabled, SBC forwards the received reliable provisional response without generating PRACK locally. It waits for the PRACK from ingress peer to generate PRACK towards egress peer. NOTE: This flag must be enabled when both endpoints support PRACK and the 100rel header extension. | endToEndReInvite | When this flag is enabled, SBC forwards the Re-INVITEs received from one leg (with or without SDP) to the other leg. | endToEndUpdate | When this flag is enabled, SBC forwards the Update (With SDP) received from one leg to the other leg. |
|
f
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {f} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
fromHeaderAnonymisation <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
fromHeaderAnonymisation
| Enable this flag to prevent the FROM header of INVITE message from being anonymized. The SBC always relays the FROM header of INVITE. |
|
i
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {i} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
includeIpPortsInFromAndToHeaders <disable | enable>
includeReasonHeader <disable | enable>
includeSsAttributeInInitialInvite <disable | enable>
includeTransportTypeInContactHeader <disable | enable>
insertPAccessNetworkInfo <disable | enable>
insertPeerAddressAsTopRouteHeader <disable | enable>
insertUEFlowInfo <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
includeIpPortsInFromAndToHeaders | When enabled, port numbers are included with IP addresses in the From and To headers of SIP messages. When disabled, port numbers are not included with IP addresses. | includeReasonHeader | When enabled, the includes the Reason header in 18x, 4xx, 5xx, Cancel, and Bye messages in the forward direction. It is provisioned on the egress trunk group. | includeSsAttributeInInitialInvite | Enable this flag to send the 'a=silenceSupp:off' in the Initial Invite SDP to the remote peer when Silence Suppression is OFF. When disabled, 'a=silenceSupp' is not sent in the Initial Invite SDP to the remote peer. Note that 'a=silenceSupp:on' is never sent to the remote peer in the Sonus implementation when Silence Suppression is ON. | includeTransportTypeInContactHeader | This flag is used by an configured for an external PSX.When this flag is enabled, the includes the Transport Type parameter in the Contact headers of 3XX responses. The PSX sends the value of this flag in a DIAMETER response to the SBC.When this flag is disabled, the SBC does not include the Transport Type parameter. NOTE: Ensure passcompletecontactHeader flag is disabled (except for the REGISTER method) to obtain the desired behavior. | insertPAccessNetworkInfo | Enable flag to construct and send PANI with received location info. | insertPeerAddressAsTopRouteHeader | When enabled, the SIPE inserts the IP address of the next hop in the top route header of the egress INVITE. This is required when the acts as a IMS BGCF proxy, and also supports SIPconnect compliance for direct inward dialing. | insertUEFlowInfo | Enable flag to send P-UE-Flow-Info header towards core. |
|
l
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {l} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
lockDownPreferredCodec <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
lockDownPreferredCodec | Enable this flag to maintain the most preferred codec of the leg on which it is enabled even if it requires transcoding. This feature also suppresses the re-INVITE triggered on the leg (on which it is enabled from the SBC) due to a MODIFY offer received from the other leg as part of mid-call codec modification. NOTE: This flag must be enabled in conjunction with minimizeRelayingOfMediaChangesFromOtherCallLegAll flag to produce desired results. NOTE: When this flag is enabled, the flag “relayDataPathModeChangeFromOtherCallLeg” must also be enabled to propagate HOLD Modify Offers (any modify offer that changes the data-path-mode). |
|
m
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {m} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
mapCauseLocation <disable | enable>
mapSuspendResumeEventInPSvcInfoHeader <disable | enable>
mapUuiInPSigInfoHeader <disable | enable>
mimeCausePrecedeReasonHeaderCause <disable | enable>
minimizeRelayingOfMediaChangesFromOtherCallLegAll <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
mapCauseLocation | Enable this flag to add the cause location is added to or retrieved from the SIP Reason header when mapping ISUP-to-SIP or SIP-to-ISUP signaling (you must also enable the Include Reason Header function). ISUP (and other protocols) indicate where in the network a call release was initiated from; this option enables the SIP Reason header to carry the cause location as well as the cause value. When flag is disabled, cause location mapping is off. | mapSuspendResumeEventInPSvcInfoHeader | Enable this flag to map the suspend/resume event in the P-Svc-Info header. When disabled, the does not map the suspend/resume event in the P-Svc-Info header. | mapUuiInPSigInfoHeader | Enable this flag to map the UUI parameter into the SIP P-Sig-Info header. When disabled, the does not map or include the UUI parameter. | mimeCausePrecedeReasonHeaderCause | When enabled, the cause value is mapped from the MIME body of the incoming message based on the Q.1912 standard. When disabled, the cause value is mapped from the Reason header based on the RFC3398 standard | minimizeRelayingOfMediaChangesFromOtherCallLegAll | The advertised Sonus SIP SDP is described as a set of capabilities that the can receive. The by default issues a Modify Offer ( re-INVITE, UPDATE) whenever it detects a change in receive capabilities. In certain scenarios, the Modify Offer can be perceived as redundant. Enabling this flag suppresses redundant Modify offers being sent from the .When enabled, the suppresses modify offers that have no changes to the “common codecs” that impact the end-user experience. “Common codecs” are codecs that exist both in the initial offer and answer. Changes to common codecs imply changes to DTMF, packetization time, codec specific FMTP attributes and data-path-mode. |
|
n
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {n} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
noContentDisposition <disable | enable>
noPortNumber5060 <disable | enable>
noServiceRouteHdrForEmergencyRegistration <disable | enable>
noUserinfoInContactHeader <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
noContentDisposition | The Content Disposition header format in SIP messages expected by the remote peer. When enabled, the remote peer expects no Content Disposition header. When disabled, remote peer expects the standard SIP message format which includes Content Disposition header. | noPortNumber5060 | Use this parameter to control whether port number 5060 is sent to the remote peer in the Request-URI of PRACK, ACK, and BYE messages.
When enabled, the outgoing SIP URI does not include port number 5060 (sip:user@host). In addition, only sends out the Record-Route and Route headers of SIP request and response messages with the port number it receives, such that if the does not receive a port number in Record-Route headers, the does not send out a port number in the Record-Route and Route headers.
When disabled, the outgoing SIP URI includes port number 5060 (sip:user@host:5060). In addition, if SBC does not receive a port number in Record-Route headers of SIP request and response messages, the inserts port number 5060 into the outgoing Record-Route and Route headers.NOTE: Enable this flag to allow DNS NAPTR/SRV lookups. | noServiceRouteHdrForEmergencyRegistration
| When this flag is enabled, does not add Service-Route headers for emergency registrations even if addPathServiceRoute and createServiceRouteHeader flags are enabled. | noUserinfoInContactHeader | When this flag is enabled, the remote peer expects no userinfo component in the Contact header URI. When disabled, the remote peer expects the standard format of the Contact header, which includes the userinfo component. |
|
o
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {o} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
onlySelectedCodecInSessionRefresh <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
onlySelectedCodecInSessionRefresh | When this flag is enabled, the SDP in a session keep-alive re-INVITE message will only include the currently-selected codec for the call. When disabled, the SDP in a session keep-alive re-INVITE message will be identical to that in the last offer. See example below.
NOTE: The o-line of the SDP will be identical to that in the last offer. |
|
| Example: |
|---|
--> The SBC sends an INVITE including Codec-A and Codec-B <-- An 18x message is received identifying Codec-B. --> The SBC sends a keep-alive reINVITE depending upon the flag setting: disable: SBC sends keep-alive reINVITE with both Codec-A and Codec-B includedenable: SBC sends keep-alive reINVITE including Codec-B
|
p
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags (p) |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
pCalledPartyIDSupport <disable | enable>
pChgMsgInfo <disable | enable>
publishIPInHoldSDP <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
pCalledPartyIDSupport | Enable flag to allow acting as P-CSCF to store pCalledPartyID header when a call destined to UE is received from IMS core network.
inserts P-Asserted-Identity header in the 18x/2xx responses received from UE towards core and places the stored P-Called-Party-ID information in the PAI header. | pChgMsgInfo | When enabled, the adds a P-ChgMsg header to a SIP INFO or a 183 Session Progress (which it selects depends on the call state). The P-ChgMsg header contains the interworked ISUP CHG with TLEC information. When disabled, this function is disabled. | publishIPInHoldSDP
| Enable flag to include the SBC's IP address in the SDP for hold. |
|
r
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {r} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
reQueryPsxOnRegisterRefresh <disable | enable>
rejectRefer <disable | enable>
relayDataPathModeChangeFromOtherCallLeg <disable | enable>
replaceHostOnViaHeader <disable | enable>
restrictHistoryInfoHeader <disable | enable>
routeUsingRecvdFqdn <disable | enable>
|
Command Parameters
| Div |
|---|
|
| Parameter | Description |
|---|
reQueryPsxOnRegisterRefresh | When enabled, the will re-query the when it receives a register refresh message, which may result in a new or updated result for the register relay. When disabled, the does not re-query the on a register refresh. This setting must be made on the ingress trunk group profile facing the registered endpoint. | rejectRefer | When enabled, the rejects SIP REFER messages from the peer and responds with a 405 Method Not Allowed message. | replaceHostOnViaHeader | Use flag to replace IP address of the top-most via header on the outgoing request with IP address or hostname present in the top-most via header received.disable (default) – SBC defaults to B2BUA behavior where the VIA header contains local SIP signaling address.enable – Replaces the IP address of via header on the initial outbound INVITE or REGISTER with the address received in the via header of the incoming request.
| relayDataPathModeChangeFromOtherCallLeg | When this flag is enabled in conjunction with minimizeRelayingOfMediaChangesFromOtherCallLegAll flag,the HOLD modify offers (more specifically, any modify offer that changes the data-path-mode) are propagated. NOTE: The relayDataPathModeChangeFromOtherCallLeg flag is only available when minimizeRelayingOfMediaChangesFromOtherCallLegAll is enabled. | restrictHistoryInfoHeader | Enable this flag to restrict History InfoHeader Flag depending upon the Privacy header or Privacy URI. | routeUsingRecvdFqdn | Enable flag to use the FQDN received in contact header of Refer-To/3xx for routing. |
|
s
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {s} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags
sdpOlineOnlyCompares <disable | enable>
sendAllAllowedCodecsForLateMediaInviteOrReInvite <disable | enable>
sendDirectMediaInfoInSdpAttribute <disable | enable>
sendOnlyPreferredCodec <disable | enable>
sendPtimeInSdp <disable | enable>
sendRTCPBandwidthInfo <disable | enable>
sendRtcpPortInSdp <disable | enable>
sessionTimerRefreshUpdate <disable | enable>
setAcceptHeaderToApplicationSdpOnly <disable | enable>
setOlineDash <disable | enable>
setSessionVersionZero <disable | enable>
setSlineDash <disable | enable>
skipPsxQueryForRefer <disable | enable>
storePChargingFuncAddr <disable | enable>
storePChargingVector <disable | enable>
storePathHeader <disable | enable>
storeServiceRouteHeader <disable | enable>
supportSCSCFRestorationProcedures <disable | enable>
suppressMinSeIfNotReceived <disable | enable>
|
Command Parameters
| Div |
|---|
|
| Parameter | Description |
|---|
sdpOlineOnlyCompares | When enabled, the SBC checks only the o-line when comparing SDPs. When disabled, the SBC checks the entire SDP body when comparing SDPs. | sendAllAllowedCodecsForLateMediaInviteOrReInvite | | Excerpt Include |
|---|
| SDP Support |
|---|
| SDP Support |
|---|
| nopanel | true |
|---|
|
Configuration options: NOTE: Refer to SDP Support for examples of the above behavior. | sendDirectMediaInfoInSdpAttribute | Enable flag to send direct media information in the SDP attribute X-DMI. NOTE: The 'directMediaAllowed' flag must be disabled on the associated trunk group. | sendOnlyPreferredCodec
| Enable this flag on Answer side to send a single preferred codec in an Answer for an Initial Offer or Re-Invite. Enable flag on Offer side to send the most preferred codec in a re-INVITE offer. When disabled, the SBC sends all possible pass-through codecs in the route Packet Service Profile when the call is answered. This flag is used primarily in pass-through cases where more than one pass-through codec is possible. When generating an answer, the SBC chooses the most preferred codec based on the ordered list created by Send Route Preference (SRP)/Honor Remote Preference (HRP). Note that when this flag is disabled SBC sends all possible pass-through codecs in the answer or the Route Packet Service Profile when generating a re-INVITE offer. For offers generated by the SBC, especially in HOLD/RESUME cases, only the most preferred codec is sent in a re-INVITE offer when this flag is enabled. | sendPtimeInSdp | Enable flag to allow the SBC to send a=ptime in the SDP. | sendRTCPBandwidthInfo
| Enable flag to send the RR and RS bandwidth information, as well as "b=RR:" and "b=RS:" in the SDP offer. | sendRtcpPortInSdp | When enabled, the adds the attribute,a=rtcp:<rtcpPort> to the audio and video m lines in the outgoing SDP (Rtcp port mentioned will be SBC RTP port + 1). | sessionTimerRefreshUpdate | Enable flag to control session timer refresh method with SIP peers via UPDATE messages. When disabled, the sends INVITE messages. NOTE: This flag is only accessible when the flag "minimizeRelayingOfMediaChangesFromOtherCallLegAll" is set to "enable". | setAcceptHeaderToApplicationSdpOnly | Use flag to specify the Accept header format in SIP messages expected by the remote peer. When enabled, the remote peer receives a short Accept header format containing the application/SDP value only. When disabled, the remote peer receives the standard Accept header format containing all of the standard parameters. | setOlineDash | Specifies the SDP O-Line format in the SDP of SIP messages expected by the remote peer. When enabled, the remote peer receives an O-Line format in which the username component is set to a "-" (dash). When disabled, the remote peer receives the standard O-Line format containing all of the O-Line parameters, including the username. | setSessionVersionZero | Enable flag to set the session version to zero in the o-line of the outbound SDP. When disabled, the assigns a session version randomly. | setSlineDash | Specifies the SDP S-Line format in the SDP of SIP messages expected by the remote peer.disable (default) – Remote peer receives standard S-Line format containing all of the S-Line parameters.enable – Remote peer receives a short S-Line format containing a dash only (s=-).
| skipPsxQueryForRefer | Set flag to skip the ERE query for Refer flag. | storePChargingFuncAddr | Set this flag to store the values received in the PCFA header in a request or response. The stored value is added to a subsequent response or a request based on the flag addPChargingFuncAddr. | storePChargingVector | When this flag is enabled, the SBC stores the P-Charging-Vector (PCV) received in requests. When the response is forwarded back, the stored PCV is inserted and sent. If the SBC receives the PCV when this flag is disabled, the SBC ignores the PCV and does not log the CDR. Example of SBC acting as IBCF: INVITE (PCV1) --> SBC --> INVITE
200 OK (PCV1) <-- SBC <-- 200 OK | storePathHeader | Set this flag to locally store (cache) a Path header received in an incoming REGISTER request. | storeServiceRouteHeader | Set this flag to locally store (cache) a Service-Route header received in an incoming 200 OK response to REGISTER. | supportSCSCFRestorationProcedures | SBC acting as P-CSCF rejects a request with 504 (Server Time-out) response carrying MIME body of type application/3gpp-ims+xml, if SBC does not receive any response to the request from S-CSCF network or the next hop address is blacklisted as part of ARS (Address Reachability Service) service (see IMS Restoration Procedures for addtional details). | suppressMinSeIfNotReceived | Enable flag to add Min-SE header to re-INVITEs/UPDATEs only if it exists in the previous offer/answer. When this flag is disabled, Min-SE is always added to session refreshes. |
|
t
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {t} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags terminalPortabilityInterworking <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
terminalPortabilityInterworking | Enable flag to provide a service between ISUP and SIP to move a terminal from one socket to another, or to move a call from one terminal to another while the call is active. |
|
u
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {u} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags usePsxRouteforRegisteredInvite <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
usePsxRouteforRegisteredInvite | Enable flag to route INVITE from the core to the received PSX route for registered users, but not to the contact address of the RCB. |
|
v
Command Syntax
| Code Block |
|---|
| title | commonIpAttributes flags {v} |
|---|
|
% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes flags validateAccessNwInfoHeader <disable | enable>
|
Command Parameters
| Caption |
|---|
|
| Parameter | Description |
|---|
validateAccessNwInfoHeader | Enable flag to prevent forwarding P-Access-Network-Info header when network-provided parameter is present. This flag is associated with Egress TG with respect to Request and Response message (Core Side). NOTE: This is applicable for both INVITE and non-INVITE message and their responses. |
|