This window displays memory utilization statistics for the 'n' number of intervals.
On the
main screen, go to
Monitoring >
System >
Category: Hardware Status >
Memory Util Interval Statistics. The Memory Util Interval Statistics window is displayed.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Memory Util Interval Statistics |
|---|
|
|
The following fields are displayed:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Memory Util Interval Statistics Parameters |
|---|
|
| Parameter | Description |
|---|
Number | Sequence number which identifies the interval for which the set of statistics is required. | Ce name | SBC node name. | Interval Valid | A setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval. | Int Time | The system up time when the interval statistics are collected. | Average | The average memory utilization percentage for this interval. | High | The high memory utilization percentage for this interval. | Low | The low memory utilization percentage for this interval. | Average Swap | The average swap memory utilization percentage for this interval. | High Swap | The high swap memory utilization percentage for this interval. | Low Swap | The low swap memory utilization percentage for this interval. |
|
By default, only ten entries are displayed in a view. Use the Show <number> entries drop-down box to select the number of entries to display.