Specifies the treatment taken when the modem tone is detected.
To View and Edit Modem
On the
main screen, go to
Configuration >
Profile Management >
Category: Media Profiles >
Codec Entry >
Modem.
Select the desired Codec Entry from the drop-down list to view its respective Modem parameters.
The Modem window is displayed.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - Media Profiles - Codec Entry - Modem |
|---|
|
|
The following fields are displayed:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Codec Entry - Modem Parameters |
|---|
|
Parameter | Description |
|---|
Failure Handing
| Specifies the behavior when a modem tone is detected but the treatment fails for any reason. The behavior can be: Disconnect—Release the call.Continue—Continue to process the call.
The default setting is Continue. | Tone Treatment
| Specifies the treatment taken when the modem tone is detected, which can be: none—Do nothing when the modem tone is detected.notifyPeer—Notify the peer when the modem tone is detected.disconnect—Disconnect the call when the modem tone is detected.fallbackToG711—Fall back to G.711 when the modem tone is detected.applyFaxTreatment—Treat the modem tone as a fax tone, and apply the fax treatment for the selected codec.
The default setting is None. |
|
| Note |
|---|
|
For G.711 calls, Notify Peer and Disconnect require a compression resource be allocated. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.