Specifies the MFR2 digit generation attributes.
To View and Edit Mfr2Generate
On the
main screen, go to
Configuration >
Profile Management >
Category: Digit Profiles >
Digit Profiles >
Mfr2Generate.
Select the desired Digit Profile from the drop-down list to view its respective Mfr2Generate parameters.
The Mfr2Generate window is displayed.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - Digit Profiles - Mfr2Generate |
|---|
|
|
The following fields are displayed:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Dtmf Mfr2Generate Parameters |
|---|
|
| Parameter | Description |
|---|
Power | Digit generation power level (in dBm). (range: -50 to +3 / default = -7). | Make | Duration (in milliseconds) of generated digits. (range: 0-8000 / default = 150). | Break | Silence duration (in milliseconds) between generated digits (range: 0-8000 / default = 150). | Pre Pulse Delay | Delay (in milliseconds) between the end of last compelled signal and the start of backward pulsed signal. (range: 0-8000 / default = 100). | Max Fwd On Duration | Maximum amount of time (in milliseconds) a forward signal is sent. (range: 100-60000 / default = 15000). | Max Fwd Off Duration | Maximum amount of time (in milliseconds) between the removal of a forward signal and the sending of the next forward signal. (range: 100-60000 / default = 27000). | Final Digit Delay | Minimum interval (in milliseconds) after sending last message to apply answer line signal in the backward direction. (range: 0-8000 / default = 50). |
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.