Specifies the details about Response policer.
To View and Edit Response
On SBC main screen, go to Configuration > System Provisioning > Security Configuration >Sip Cac Profile > Response.
Select the desired Sip Cac Profile from the drop-down list to view its respective Response parameters.
The Response window is displayed.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Security Configuration - Sip Cac Profile -Response |
|---|
|
|
The following fields are displayed:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Response Parameters |
|---|
|
Parameter | Description |
|---|
Ingress Aggregate Preference
| Specifies the preference for RESPONSES within the ingress aggregate policer. The value range from 1 - 10. The default value is 1. | Ingress Burst Size
| Specifies the maximum burst size for ingress RESPONSES. The value range from 1 - 10000. The default value is 1. | Ingress Rate
| Specifies the maximum ingress RESPONSES rate in Other Requests per period. The value range from 1 - 1000 or unlimited. | Ingress Rate Period
| Specifies the time period (in seconds) over which ingress RESPONSES rate applies. The value range from 1 - 10 seconds. The default value is 1 second. | Egress Aggregate Preference
| Specifies the preference for RESPONSES within the egress aggregate policer. The value range from 1 - 10. The default value is 1. | Egress Burst Size
| Specifies the maximum burst size for egress RESPONSES. The value range from 1 - 1000. The default value is 1. | Egress Rate
| Specifies the maximum egress RESPONSES rate in aggregate messages per period. The value range from 1 - 1000 or unlimited. | Egress Rate Period
| Specifies the time period (in seconds) over which egress RESPONSES rate applies. The value range from 1 - 10 seconds. The default value is 1 second. |
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.