Specifies the details about Refer policer.
To View and Edit Refer
On SBC main screen, go to Configuration > System Provisioning > Security Configuration >Sip Cac Profile > Refer.
Select the desired Sip Cac Profile from the drop-down list to view its respective Refer parameters.
The Refer window is displayed.
Caption |
---|
0 | Figure |
---|
1 | Security Configuration - Sip Cac Profile - Refer |
---|
|
|
The following fields are displayed:
Caption |
---|
|
Parameter | Description |
---|
Ingress Aggregate Preference
| Specifies the preference for REFER within the ingress aggregate policer. The value range from 1 - 10. The default value is 1. | Ingress Burst Size
| Specifies the maximum burst size for ingress REFER. The value range from 1 - 10000. The default value is 1. | Ingress Rate
| Specifies the maximum ingress REFER rate in REFER per period. The value range from 1 - 1000 or unlimited . | Ingress Rate Period
| Specifies the time period (in seconds) over which ingress REFER rate applies. The value range from 1 - 10 seconds. The default value is 1 second. | Egress Aggregate Preference
| Specifies the preference for REFER within the egress aggregate policer. The value range from 1 - 10. The default value is 1. | Egress Burst Size
| Specifies the maximum burst size for egress REFER. The value range from 1 - 1000. The default value is 1. | Egress Rate
| Specifies the maximum egress REFER rate in REFER per period. The value range from 1 - 1000 or unlimited . | Egress Rate Period
| Specifies the time period (in seconds) over which egress REFER rate applies. The value range from 1 - 10 seconds. The default value is 1 second. |
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.