| Include Page |
|---|
| Transparency_Profile_Note |
|---|
| Transparency_Profile_Note |
|---|
|
Use this object to configure the SIP Headers and Parameters flags.
To View and Edit Sip Headers And Parameters - Flags
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip Signaling Profile > Egress Ip Attributes > Sip Headers And Parameters > Flags. The Flags window is displayed.
DEFAULT_H323
On the Flags window, choose the Ip Signaling Profile as DEFAULT_H323 to view the Flags for H323 Trunk Group.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Trunk Provisioning - Egress Ip Attributes H323 Sip Headers and parameters - Flags |
|---|
|
|
There are no Flags parameters for DEFAULT_H323 type of Egress Ip Attributes.
DEFAULT_SIP
On the Flags window, choose the Ip Signaling Profile as DEFAULT_SIP to view the Flags for SIP Trunk Group.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Trunk Provisioning - Egress Ip Attributes SIP Sip Headers And Parameters - Flags |
|---|
|
|
The following fields are displayed:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Egress Ip Attributes Sip Headers and Parameters - Flags |
|---|
|
Parameter | Description |
|---|
Include Cic | If enabled, the includes the Carrier Identification Code in a cic= parameter in outgoing INVITE messages. The options are: | Include Cpc Information | If enabled, the includes the Calling Party Category (CPC) parameter value in the From header of outgoing SIP INVITE messages.The CPC parameter characterizes the station used to originate a call, such as ordinary, priority, data, test, operator, pay phone, prison, hotel or unknown. The options are: | Include Npi | If enabled, the includes the Numbering Plan Indicator in a npi= parameter in outgoing INVITE messages. The options are: | Include Olip | If enabled, the includes the Originating Line Information Parameter in a oli= parameter in outgoing INVITE messages. The options are: | Include PKAdn | When enabled, the includes the P-K-Adn header in egress SIP messages. When disabled, the SBCdoes not include the P-K-Adn header. The P-K-Adn header is a customer-specific SIP header used for ISUP-to-SIP interworking and contains the Translation Source Number (TSN) used in Number to SIP URL translation via the Number Username Translation screen (Generic variant only). The options are: | Include Pstn Parameters | If enabled, the includes a set of specific PSTN parameters in a pstn-params= entry in outgoing INVITE messages. The PSTN parameters currently included in pstn-params are Screening Indicator, ISDN Indicator, and Transmission Medium Requirement (TMR). The options are: | Include Qvalue | If enabled, the ERE SIP proxy/redirector includes the qvalue parameter (for example, q=0.9) in the Contact header of outgoing 3xx messages. The options are: | Skip CSeq Check In Early Dialog | When enabled, the accepts multiple SIP requests in which the CSeq number in a later request is of a lesser value than the CSeq number received in earlier requests. The options are: | Transparency For Destination Trunk Group Parameter | When enabled, if ERE receives both tgrp parameter and trunk-context in an ingress INVITE Request-URI, ERE as proxy transparently passes the tgrp parameter and trunk-context in the egress INVITE Request-URI. Values selected for the "Destination Trunk Group Option" are ignored. The options are: | End To End Ack | When enabled, the ACK is sent towards Egress for the initial invite after receiving it from the Ingress (remote) entity. The options are:
|
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.